Jump to content
SAU Community

Recommended Posts

:laugh:

u live in murray town?!?!?!

crayzeh!

okies that'd be shweet

Well did u, Andy, Lee and me wanna go there togethers?

Sounds like a plan where do you guys wanna meet up at???

I wish youtube worked at work..

:spank: in the same boat as you ian....

do you get this funny sinking feeling :ninja:

:spank: the shell was where i was going to suggest...

otay the shell it is 6;30 a good time for every one??

Mike you wanna meet up there as well??

Shane you still need that lift??

:ninja: the shell was where i was going to suggest...

otay the shell it is 6;30 a good time for every one??

Mike you wanna meet up there as well??

Shane you still need that lift??

BAHAHAHAHAHA

OK FINAL MEETING SPOT IS THE SHELL!!!!!! 6:30 BIARTCHES!!!

:spank:

rick-jamescuddle.gif

Shane you still need that lift??

yeah probably...i forgot to bring a change of clothes with me, and theres no farking way im staying in my work clothes all nite! looks like im going for a trip home at lunch :spank:

yeah probably...i forgot to bring a change of clothes with me, and theres no farking way im staying in my work clothes all nite! looks like im going for a trip home at lunch :spank:

I'll bring a change of clothes along for ya big boy :ninja:

"It's Mary-Anne... singing that RnB SEX music! 'Do it to me again'. Now we all know what 'it' means"

"Hush up now, i'm surprised you even remember what 'it' is"

:spank:

Hey bunts! Can you guess what movie i'm watching?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...