Jump to content
SAU Community

Recommended Posts

Very shameful, very shameful indeed.

was that a highlight of your weekend?

ummmmmmmm no the highlight was probably my mum laughing her ass off at me and telling everyone to come look at me when i was sleeping (passed out) the next day cos i was hugging a bowl cos i thought i was gonna be sick LOL

ummmmmmmm no the highlight was probably my mum laughing her ass off at me and telling everyone to come look at me when i was sleeping (passed out) the next day cos i was hugging a bowl cos i thought i was gonna be sick LOL

lol heh those are the best days, cause you get to feel better as the day goes on...well eventually you do....hopefully.

lol heh those are the best days, cause you get to feel better as the day goes on...well eventually you do....hopefully.

ha ha ha it looked a bit rocky there for a while...

I was fine, then went and had a shower, then felt a bit worse, then felt better, then ate subway and felt a worse ha ha ha ha

so for the rest of the day i laid down in AC doing NOTHING and felt the best :)

I am so BORED!

I am so BORED!

And I don't wanna go to class.

Ner ner ner ner ner

Cos it's a waste of time.

I am so BORED!

I'm going to pull out of uni.

So I can go back to work.

Cos i'm emo bout having no monies.

I am so BORED!

blah blah blah blah blah

I need peeps opinions on stuff...

You have always wanted to do something but never had the balls to do it. So you finaly quit work to study full time. Now you are having issues finding a job that will hire you over some 17 year old that they can pay minimum wage. So studying has turned you more emo. You have been presented with 2 options.

Option A: You are enrolled in a course that will give you 1/4 worth of what you need to do what you want in the future. The rest of the time you are enrolled in 'fluff' classes. Classes that teach you how to pick vital points in an argument, and classes that teach you why apes can't speak english. You are thoroughly enjoying the 1/4 of actual relevant learning you're doing, but are stressed about having no money to pay bills/loans/rent. You have also since discovered that you will need to add another 2 years onto the end of your degree, as the course is designed for school leavers that have prior knowledge of the subject. You know you will get a certificate at the end of it that says you stuck it out for 5 years, but you may just very well go insane in the meantime...

Option B: You have found a private school that offers night time classes that will allow you to work full time. This course has none of the 'fluff' that the university one does, and is specific to what you actually wanted in the first place. You will not end up with a piece of paper that says you went to university, but you will be finished within 2 years.

Which option do you take?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...