Jump to content
SAU Community

Recommended Posts

find 1 bit of rust on my 180sx body panel and ill get one of my chicky friends to give u head..

are you that sure mark?

plus i wouldnt accept it, i wouldnt wanna see u all cut that i got in before you >_<:P

dont make a bet you cant keep.....

i highly agree :P

dont make a bet you cant keep.....

but u see i can keep it.. lol

are you that sure mark?

plus i wouldnt accept it, i wouldnt wanna see u all cut that i got in before you >_<:P

i highly agree :P

ahaha in before me.. i never said the chick is gonna be a looker but

my point is... my car is clean enough to eat off

ok i just got this back from greenline - i am trying to order 6 sard 800cc injectors through them:

Hi Daniel,

Thanks for your enquiry. Pricing information as requested:

6 x SARD 800cc Injector (Top, High): 17,326 yen (8,663)

Shipping: 1,900 yen

TOTAL: 19,226 yen AU$188

ok so does that mean the total is $188?

but u see i can keep it.. lol

ahaha in before me.. i never said the chick is gonna be a looker but

my point is... my car is clean enough to eat off

ur car isnt that clean, it looks clean on the outside but underneath its full of f**ken bog!

ok i just got this back from greenline - i am trying to order 6 sard 800cc injectors through them:

Hi Daniel,

Thanks for your enquiry. Pricing information as requested:

6 x SARD 800cc Injector (Top, High): 17,326 yen (8,663)

Shipping: 1,900 yen

<div align="left">TOTAL: 19,226 yen AU$188

ok so does that mean the total is $188?

</div>

lol wtf man

should be 8663 yen for 1 injector

also y u getting top fee high impedence injectors? u goin top feed rail on the 33 gtst?

i just passed a dude on the freeway pulled over by a stealth new ford focus turbo WTF!!!!! party lights on dash and in front bar an in the parcel tray (hatch back model)

crazyshiznit

this is on rb26 in my mates car ( he does not have internet banking >_< )

ahh i see!

anyways, price should be 51978 yen + shipping. reply back to jason and smack him round the ears and tel him to give u the proper price :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...