Jump to content
SAU Community

Recommended Posts

not too old.. atleast its a late one.

i had same prob with the GTR bushes wearing and electrics..

with the 180sx things are cheaper and bushes are in better condition. cause its newer but i dislike the elctrics in it. have speaker drop outs and a/m gauges dropping out.

my guess its dodgy earths.

i have no problems at all with that sort of thing its all been replaced anyway

i will clear it up...the car has NO problems at all, just i personally do not like the car and feel for the money I could have done better actually a lot better, if some one else bought it they could have it the way i want for probably 2k, its just i dont care enough to screw around with it again

uve got genuine gaskets and intake gaskets... wtf..? and u dnt need a genuine gtr key

thats what happens when u bust them :D

also no gtr is complete without the real key! :sorcerer:

but u have genuine gasket kit which include intake mani gasket. and new waterpump should come with a gasket too.

and u dnt need to paint covers and bay.. and nor do u need plates. just somethings u can wait out a bit

once again mark, quality of job. also why do painting later when everything is apart and stripepd now?

it doesnt say genuine gasket kit, i bought random ones from dan. when i was dummy fitting the motor i had the intake gaskets on, and they broke when i took the plenum off.

also water pumps dont use gaskets, they use gasket goop. u shoulda known that already. its oil pumps that use gaskets.

once again mark, quality of job. also why do painting later when everything is apart and stripepd now?

it doesnt say genuine gasket kit, i bought random ones from dan. when i was dummy fitting the motor i had the intake gaskets on, and they broke when i took the plenum off.

also water pumps dont use gaskets, they use gasket goop. u shoulda known that already. its oil pumps that use gaskets.

the last waterpump i fitted used gasket and silicone.. ohhh snap.. huh..?? i basted the gasket.. on ur list it says waterpump gasket but u should knw that.. u made the list.

the last waterpump i fitted used gasket and silicone.. ohhh snap.. huh..?? i basted the gasket.. on ur list it says waterpump gasket but u should knw that.. u made the list.

it says

water pump & inlet manifold gasket
which means water pump (u know the big metal thigny majingy) and an intake gasket, ya farken douchbag :D
it says which means water pump (u know the big metal thigny majingy) and an intake gasket, ya farken douchbag :D

haha

why would u group water pump and inlet gasket together. why not say

a. water pump

b. inlet manifold

ppl are gonna read it and think u want a waterpump gasket.

haha

why would u group water pump and inlet gasket together. why not say

a. water pump

b. inlet manifold

ppl are gonna read it and think u want a waterpump gasket.

caus i bought them at the same time and i know what it meant :D

plus i only had a total price, not individual prices

no they wont.

did u get to see it before i removed the link? i can pm it to you if u want a squizz...i only removed it caus theres some prices in there im not suppose to let anyone else see/know about :D

did u get to see it before i removed the link? i can pm it to you if u want a squizz...i only removed it caus theres some prices in there im not suppose to let anyone else see/know about :D

nup didnt see it... you better PM me lol

no they wont.

ur gay

they are all the same anyway.. good ol nissan for doing that.

incorrect. rb20 and 25 differentiate wiith bolt placement

did u get to see it before i removed the link? i can pm it to you if u want a squizz...i only removed it caus theres some prices in there im not suppose to let anyone else see/know about :D

i can post the imageshack link lol... but im not that much of a dick

hmm well jspec sucked today

looking for a chaser i hope..

go see iron chef imports.. he specialises in chaser

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...