Jump to content
SAU Community

Recommended Posts

groovy.....i am still gettin parts :D

lol trueeeee.

i mite add, if ur going to use an n1 pump, make sure u have the right oil restrictors in, and a drain from the back of the head.

P.S found a sump yet? :ninja:

I will sell you a N1 oil pump, you get it when you buy the rest of my engine :D

for $500 ok no prob...

lol trueeeee.

i mite add, if ur going to use an n1 pump, make sure u have the right oil restrictors in, and a drain from the back of the head.

P.S found a sump yet? :ninja:

why would i need them....seriously.

no i havent...Dan said he had one though and a timing cover etc.

for $500 ok no prob...

why would i need them....seriously.

no i havent...Dan said he had one though and a timing cover etc.

x by 10 and its yours! and that would save you about that much in the long run over building your own :ninja:

for $500 ok no prob...

why would i need them....seriously.

no i havent...Dan said he had one though and a timing cover etc.

lets face it, ur not going to be easy on this motor, and ur going to see it bouncing off the limiter a fair few times. uve read the oil control thread right? rb's spin bearings because of the lack of oil in the sump, that means its up in the head.

restricting the flow to the head, and running an external drain from the back of the head, will help get all that excess oil back down into the sump, where its meant to be.

also, the n1 pumps flow more than the std pumps, but at the same pressure.

lets face it, ur not going to be easy on this motor, and ur going to see it bouncing off the limiter a fair few times. uve read the oil control thread right? rb's spin bearings because of the lack of oil in the sump, that means its up in the head.

restricting the flow to the head, and running an external drain from the back of the head, will help get all that excess oil back down into the sump, where its meant to be.

also, the n1 pumps flow more than the std pumps, but at the same pressure.

Fark that...too much money and i wont be bouncing off no limiter either. i think i will be putting around in this car.

Fark that...too much money and i wont be bouncing off no limiter either. i think i will be putting around in this car.

too much money? wtf are u buying an n1 oil pump then for? :domokun:

for ~50 bucks in mods u could save ur farking engine u toss :D

Fark that...too much money and i wont be bouncing off no limiter either. i think i will be putting around in this car.

whats the point of building it to putt around in it? Thats the main reason i am selling mine! I built it then had to spent the best part of a year babying it and it made me think 'what the hell is the point of this car?'

too much money? wtf are u buying an n1 oil pump then for? :domokun:

for ~50 bucks in mods u could save ur farking engine u toss :D

$50 bucks!!! ok where at...

and where else can i get an oil pump from...Nissan are gonna prob gonna charge me the same amount for a standard one.

whats the point of building it to putt around in it? Thats the main reason i am selling mine! I built it then had to spent the best part of a year babying it and it made me think 'what the hell is the point of this car?'

eh....ok....i mean not thrashing it, but i suppose that didnt help the last one.

$50 bucks!!! ok where at...

and where else can i get an oil pump from...Nissan are gonna prob gonna charge me the same amount for a standard one.

eh....ok....i mean not thrashing it, but i suppose that didnt help the last one.

build it to take punisment or give up now :D

$50 bucks!!! ok where at...

and where else can i get an oil pump from...Nissan are gonna prob gonna charge me the same amount for a standard one.

eh....ok....i mean not thrashing it, but i suppose that didnt help the last one.

all u need is a couple of $5 oil restrictors (chilton can make them up) and the back welsche plug in the head punched out, a pipe fabd up, pressed & screwed into place, a -10 fitting welded onto ur sump, and a piece of aeroquip oil hose and ur done!

i got my head drain pipe from r33_racer, pm him to see if he can make you one

the traders on here can supply n1 pumps for ~$360

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...