Jump to content
SAU Community

Recommended Posts

hmm nice.. i might do something like this oneday.

how muc for the lines and nuts..? i guess dan held ur hand thru this one

lol joshwa.. should have drove past my house im just off the M1.. give me a call next time u douche..

was $93 for the line, nuts & 1.5l dot 4 fluid

Shaneypoo...i measured with my stick roughly 3.2m for main hoop, 2.4m for each A pillar. So rounded out to 3.5m and 2.5m x 2 so thats 8.5m plus whatever you want in the 45mm for the back. I reckon 10m worth of the big shit...and the rest in the small shit and then we be jamming?

yeah mate sounds good to me :yes:

not pick me up come past and i follow in either 180sx..

any popo trouble..

You would have slowed me down with your silly 180kph cut.

Yeh pop at the main surface lights along the beach, but they left me alone, heaps of c**ts giving me respect but wasnt doing anything wrong so i guess they couldnt pull me over anyway

sup mud crab

whats kicking king of bling

You would have slowed me down with your silly 180kph cut.

Yeh pop at the main surface lights along the beach, but they left me alone, heaps of c**ts giving me respect but wasnt doing anything wrong so i guess they couldnt pull me over anyway

bahaha my 180 speed cut.. lol.

the RB20 silvia dnt have one.. dnt knw why.. seems to be chipped. hey do factory R32 GTST have speed cut..? :)

whats kicking king of bling

bahaha my 180 speed cut.. lol.

the RB20 silvia dnt have one.. dnt knw why.. seems to be chipped. hey do factory R32 GTST have speed cut..? :)

You said follow in the 180sx, not the silvia.

An yes they have cuts

whatever.. lol i meant monday same day u post sil was here. lol

COD4.. call of duty.. good game

yay for $1.50 tuesdays..

anyone knw the V0* number for SR filters..?im not using valvoline wanna try pure one

www.nissansilvia.com

lol

I have a crab in my pool. its about 3 inchs x 2 inchs. I have no idea how it got there. Dad reckons maybe a bird dropped it. Idea;s?

Perrigan Beach

we had a toad in ours.. f**ker died to th hand of a golf club!

Blogan

start yokle voice/

we gots a few scorpions an a couple a brown snakes in mah pool - come swimminn at the switch bitch

Ipswitch

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...