Jump to content
SAU Community

Lowered Vehicle Height?

-=white angel=-
 Share

Recommended Posts

-=white angel=- Rookie

-=white angel=-

Posted
Posted

Hello all,

Im sure this question would have been answered before, but I cant seem to find an exact fiqure? I'm trying to find the QLD LEGAL vehicle hieght. And from what point of the car is it measured, lowest part of the car?

I've heared rumors beyond stupidity, like the blue people measuring with an actual wheel thing to find if its a legal height.

Thanks guys :)

Link to comment
https://www.sau.com.au/forums/topic/119779-lowered-vehicle-height/
Share on other sites
danielson Proficient

danielson

Posted
Posted

in nsw i believe its 100mm. and yes the cops do use a height wheel to make sure. i got done with 20s on the car, it was 100mm high, but the exhaust hung down to 45mm above the deck. lucky i know people that "fix" these things...

neil_se Experienced

neil_se

Posted
Posted (edited)

The height wheel has been used in Qld for a few years (its actually 97.9mm IIRC). The law is that the lowest part of the vehicle (aside from wheels and mud flaps) must be greater than 100mm from the ground (this includes exhaust, chassis, body kit, etc).

Edited by neil_se
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...