Jump to content
SAU Community

Recommended Posts

Final price drop guys want to sell this car want a cheap run about and something that doen't get attention every where i go. Will take $13,000 with out stereo or $14,000 with come on guys someone must want nice quick looking 32

Final price drop guys want to sell this car want a cheap run about and something that doen't get attention every where i go. Will take $13,000 with out stereo or $14,000 with come on guys someone must want nice quick looking 32

Is that with a RWC? I'm interested if it's without stereo and RWC supplied.

Is that with a RWC? I'm interested if it's without stereo and RWC supplied.

i will see what i can do with the roady it is at my tuners today getting a couple things fixed with the idle he does them so i will see if he will do one for you

Edited by wheels_24

having trouble finding someone that will do a roady on the car because it is external gate on the turbo so unless someone on here nows a guy that can help me out i dont think i will be able to supply one. everything else is fine it is just some of the mods that are the problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...