Jump to content
SAU Community

Recommended Posts

hey guys dont have any idea what these are called but im after the display for gauges on my dvd screen in my gtr like the r34 gtr with boost oil and all the rest of it diplayin on my screen.

anyone no what these are call can anyone please help me??

Link to comment
https://www.sau.com.au/forums/topic/120504-racing-meter-on-dvd-screen/
Share on other sites

hks camp is the product name

needs a seperate tv, output via rca video and audio

hks camp unit taps into stock wiring loom (so will work with stock ecu or aftermarket) has external sensor input for boost, oil pressure, oil temp, water temp and so on

apexi fc watch is a custom built software app to tap into apexi powerfc using datalogit cable/dongle and display guages on a tv screen

you can also adapt the BNR34 MFD into any car and tap onto the wiring loom and use it's screen. its just a bit work, a few people have done it

apexi fc watch only works on the apexi powerfc.

the hks camp will work on any ecu that uses the standard car sensors.

ie if you have your own oil pressure sensor (say a greddy guage) then its not likely to work, and youll need the corresponding hks camp oil pressure sensor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...