Jump to content
SAU Community

Recommended Posts

hi guys..

PUTTING THE CAR BACK UP FOR SALE AS A BUYER PULLED OUT AT LAST MIN EVEN AFTER PLACING DEPOSIT ON VEHICLE. I NEED TO SELL IT ASAP TO FUND PT2 OF MY O/S TRIP...

I will also swap the car for something smaller plus some $$ my way... i just need some extra $$

the car is in a1 mechanical condition and body wise only has 1 or 2 minor scratches which are expected from a 14year old car

dont hesitate to contact me or ask me questions. im surprised the car hasnt gone yet, there is nothing wrong with it, runs beautifully and has no mechanical issues.

i own 2 other cars so this is pretty much my weekend car and as such is babied

here are some of the details:

Model: 1992 R32 GTS-t

Colour: Burgundy

Kms: 142,000k

Trans: 5spd Manual

Modifications:

Highflowed RB25 Turbo (currently running 8psi)

RB25 Air Flow Meter

3" exhaust (drift style muffler angled out the back)

Remapped ECU (Dr Drift)

Apexi SAFCII (fully dyno tuned)

Larger Injectors

Bosch fuel pump

Adjustable Boost Bleed Valve

New Exedy Super HD clutch less than 2000ks

K&N Pod

Front Strut Brace

Lowered: hks rear and unknown front

Camber adjustable arms (rear)

Full Viper Alarm, keyless entry

Apexi T/Timer

Grey/Black Powder coated rims (front stock, rear gtr)

Clear front indicators

Larger Brakes M-Spec

Full M-Spec body kit w/rear wing removed and bootlid welded and painted

Interior

The inside is in immaculate condition, no tears or rips

Boost gauge

Other info/things that have been replaced in the last 12months

-exhaust manifold and turbo gaskets replaced.

-new waterpump installed and have had the radiator and coolant system flushed, new fuel pump and plugs were also done, along with the timing belt while it was in the mechanics

- new front and rear pads done 5000kms

-had a brand new clutch slave and master put in

- new H/D clutch place 2000kms

oil and filter done every 5,000 with motul oil

feel free to ask any questions

ONLY $9000 as i need $$ for my os trip... RWC can be negotiated upon with potential buyer

cheers

james

post-23423-1160964139.jpg

post-23423-1160964197.jpg

Edited by RCEBNR
Link to comment
https://www.sau.com.au/forums/topic/120862-fs-92-r32-gts-t-type-m/
Share on other sites

  • 4 weeks later...

still considering sale.. ive put a few pics up...

the front bar damage just occured as a result of an f*wit tow truck driver ;) who didnt take a lot of care getting the car onto the truck 2 weeks ago, when i had the car towed to the mechanics to re-weld the clutch pedal which broke..

post-23423-1152418747.jpg

post-23423-1152418869.jpg

post-23423-1152418974.jpg

post-23423-1152419105.jpg

Edited by RCEBNR
  • 2 months later...

bump

now has 4 new tyres, installed the high-flow cat, and installed a cusco copy front strut brace

going O/S in november so its going for 11k or id consider a trade for something smaller and a cash adjustment my way ..

basically im selling to help fund my o/s adventure!!

  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
    • I installed my link ecu shortly after. But car ran fine with stock ecu and r35 coils, just had the traction control and slip lights on.
×
×
  • Create New...