Jump to content
SAU Community

Recommended Posts

I was talking it over with the folks and it looks like I'm getting a driving coarse for my 19th birthday :D

My normal driving is excellent but, coming from driving a FWD corolla, if the back starts sliding out I'm screwed. I havn't needed to test my wet road heavy braking skills yet so I'd like to do that aswell. If they teach me to drift it'll be a bonus... but I'm not expecting them to :D

Has anyone done any that really enjoyed and learnt alot from?

Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/
Share on other sites

Driver training? Who needs that?? :D

Personally I think its good you want to do it & seems like you are looking forward to it, I haven't done a course like you will do but I have done 2 skidpan days & thoroughly enjoyed them, they both have concepts you can learn from. The rear end slides out & you lose it, so what? It's in a safe environment, too bad the government don't realise these sorts of things will prevent a hell of a lot more accidents than those magical speed cameras that physically stop you from crashing at speed.

Sorry to turn it into a rant, I just want the revenue raised from the cameras to be used for these sorts of events for learner & probabtion drivers. :D

Don't worry about the drift because this is for street driving, you will learn a lot about your car if it's what you use, or even the cars with the rollers on them that give you the over/understeer, it will be a good experience to do it.

Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/#findComment-2236914
Share on other sites

i have done a driving coarse. it was great fun, it was at AHG near the air port.

First is they gave me a lecture then we took our cars to the coarse. they had 3 different things, there was a track and 2 skid pads. one was for breaking and the other was driving through cones. also learned how to parrell park the easy way as they said.

i had fun and would like to do it again, in the dry cause last time it was pissing down rain. its a good experience and you learn a lot.

Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/#findComment-2237043
Share on other sites

i have done a driving coarse. it was great fun, it was at AHG near the air port.

First is they gave me a lecture then we took our cars to the coarse. they had 3 different things, there was a track and 2 skid pads. one was for breaking and the other was driving through cones. also learned how to parrell park the easy way as they said.

i had fun and would like to do it again, in the dry cause last time it was pissing down rain. its a good experience and you learn a lot.

I'm interested. How much did it cost? :(

Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/#findComment-2237826
Share on other sites

Dave the driver training he is talking about isnt the same as what we do. Ours is performance driving. I think he is doing the more traditional safety driver training with the classroom time. :dry:

But we will be arranging a peformance driving day again soon (after go karting) - keep an eye out in the members section for details. :)

Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/#findComment-2238241
Share on other sites

Dave the driver training he is talking about isnt the same as what we do. Ours is performance driving. I think he is doing the more traditional safety driver training with the classroom time. :ermm:

But we will be arranging a peformance driving day again soon (after go karting) - keep an eye out in the members section for details. :dry:

Well I've already read up on most of the techniques... I really just somewhere to practice.

but if your organising a performance day later on, do I need to do the beginner defensive coarse as a prerequisite first?

It's probably better I do it anyway from a safety point of view before I give (legal) racing a go :)

Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/#findComment-2238553
Share on other sites

Dave the driver training he is talking about isnt the same as what we do. Ours is performance driving. I think he is doing the more traditional safety driver training with the classroom time. :wacko:

But we will be arranging a peformance driving day again soon (after go karting) - keep an eye out in the members section for details. :dry:

Ahhhh! and Cool!! :)

Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/#findComment-2239917
Share on other sites

...too bad the government don't realise these sorts of things will prevent a hell of a lot more accidents than those magical speed cameras that physically stop you from crashing at speed.

....I just want the revenue raised from the cameras to be used for these sorts of events for learner & probabtion drivers. :(

Man, I couldnt agree more. All that multinova money goes into consolidated revenue with precious little going into practical inititatives like advanced driver training.

...a peformance driving day again soon (after go karting) - keep an eye out in the members section for details. :D

Looking forward to that Liz, I'm finally going to be spending some time at home :D

Sorry to jack the thread and rant off topic. :D

Edited by Mr. Keets
Link to comment
https://www.sau.com.au/forums/topic/121355-driver-training/#findComment-2241346
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...