Jump to content
SAU Community

Recommended Posts

Hi,

I would also like to know this, and with what ecu they are running and what mods they have done to the auto.

Are you running this much power, is this the reason for the question. Id say it would be a high 11 sec car if it was set up correctly with a hi-stall converter and decent tyres and suspension.

Sorry I was of no help, its just I have an auto r33 rb25det in build.

Cheers

There's a few in the UK with over 250rwkw but I don't know of any that are over 275rwkw (without using N2O)

Why do you need N2O?

I have RB25det, tomei cams, head porting, wolf3D ecu, HKS GTRS@18psi and intend to get over 275rwkw. You don't need to have a big laggy turbo to reach this target.

yea im at 275 kws

pulls like a train.

if you like doing burnouts it changes 1st, 2nd, into drive then you can just play with it in drive.

crazy smoke from the 17's

over 200kmph on the spot.

auto just has a MV shift kit, and a large trans cooler.

and im running a power fc

i have a series 1 r33 auto so i cant comment on series 2 or any other type of auto.

but with the series 1 you buy a power fc , you plug it in, and you drive it.

its that simple

all the tossers on here that tell you it wont work all drive manuals and have never ever tried

it, or even been in a auto r33.

so for all those auto r33's out there, get onto greddy from here, and order a power fc from his group

buy and enjoy..

safc etc are shit.

plug in a power fc and never look back

Power FC works with all skylines that have a seperate Auto computer, R34's have their one integral with the ECU, so if you put a power FC in, it doesn't have the auto control attached. The R34 25GT however does have a seperate ECU that can be wired in and then you can run a Power FC on a GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...