Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm getting some prints done of the image below through the guy who took the image - Easton Chang.

post-23673-1150183048.jpg

If anyone is interested, please let me know and we may be able to work out a discount for multiple purchases. Keep in mind these are prints on photo type paper, they arent just normal paper posters.

18”x12” (bit larger than A3) on photo matte paper - $35 posted

32”x”20” (extra large) on photo matte/glossy paper - $85 posted

30”x50” (Huuuge) on photo matte/glossy paper - $125 posted (you’ll have trouble finding a place to hang this)

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/
Share on other sites

To be honest I dont know!

I think the only other pics he's doing prints of at the moment are of the Pioneer NSX.. I do know that these prints are cheaper, simply because he got 250 printed! By comparison, the NSX 32 x 20" is on sale from him for $55 AUD + shipping. You can get the NSX prints, and cheap posters here: http://forums.dieselstation.com/index.php?showtopic=16764

This R34 shot is a single print (by special request from me!), so it's more expensive ($85 posted). If there are more people interested, he might be able to do them for less..

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/#findComment-2252432
Share on other sites

I'd be interested (prolly in a couple of weeks though)...

I noticed on that site you've posted, he's listed that the NSX prints would be individually signed - is that likely to be included too? Also, I hope he's not restricting orders to paypal only...:P

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/#findComment-2253904
Share on other sites

Yes, he offered to personally sign the pictures too.

I haven't discussed payment methods with him yet, although I dont see why direct bank deposit would be out of the question. IMO The only reason for paypal on the other sale is because they were all international customers, so therefore paypal is actually a cheaper option due to the bank fees involved with international wire transfers.

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/#findComment-2254557
Share on other sites

are those sizes correct?

Yeah they are correct, The height/width were swapped around though...

32”x20” (extra large) on photo matte/glossy paper - $85 posted

50”x30” (Huuuge) on photo matte/glossy paper - $125 posted (you’ll have trouble finding a place to hang this)

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/#findComment-2254562
Share on other sites

They are industrial photographic printers. I would expect at least 300 dpi too. If you know Easton Chang, you would know that he wouldnt print anything that looks less than perfect. As mentioned in the first post they are printed on high quality matte/glossy photographic paper.

They dont make crappy desktop inkjets that print 127cm x 76cm :)

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/#findComment-2267377
Share on other sites

  • 1 month later...

Sorry to bring this up from the dead a bit, but I was just wondering if either of the guys advertised on here would be willing and/or able to do posters of things other than cars, and if so the pricing and so on. I can supply the image, I just want it at poster quality or as high a quality as possible.

<^>

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/#findComment-2366207
Share on other sites

Im sure that if you approached the right person, they would be able to get anything printed at the right price. Although, you have to be clear about many copies you want, and on what sort of paper (eg. photo paper)

Link to comment
https://www.sau.com.au/forums/topic/122096-evl-r34-prints/#findComment-2367545
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...