Jump to content
SAU Community

Which Bov?

Flynnn

By Flynnn,
in Victoria

 Share

Recommended Posts

Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

take you stock bov off and and on the bottom of it there is a hole that constantly leaks boost, ther were some discussions about blocking it up with a screw and filing it off. But other than that keep the stockie, less problems with stalling and less attention from piggies...oink oink.. :D

Link to comment
https://www.sau.com.au/forums/topic/12265-which-bov/page/2/#findComment-225902
Share on other sites
Flynnn Grand Master

Flynnn

Posted
  • Author
Posted

Thanx for the feed back guyz, and all the help.. I was also wondering how could i get the cooler sound happening in my car, the sound which is something like Vooooooooodduudududu, i hear em mostly on VL's.

BTW, inark as u said for the cruises, i would love to cum but most of the cruises here are in south western suburbs. im in northern suburbs and its prettie long way to get to the cruise meetings u have. if it was in city or somewhere close to the city, it would of been great!

Link to comment
https://www.sau.com.au/forums/topic/12265-which-bov/page/2/#findComment-233404
Share on other sites
doxximus Grand Master

doxximus

Posted
Posted
Originally posted by KDR33

BTW, inark as u said for the cruises, i would love to cum but most of the cruises here are in south western suburbs. im in northern suburbs and its prettie long way to get to the cruise meetings u have. if it was in city or somewhere close to the city, it would of been great!

damn right :D

Link to comment
https://www.sau.com.au/forums/topic/12265-which-bov/page/2/#findComment-233560
Share on other sites
Guest INASNT

Guest INASNT

Posted
Posted
Originally posted by DJ_L3ThAL

i was also told you can block the stock one up with a plate in the piping, makes  ahuge diff in power i was told, im going to try it this week

huge difference in power hey?? :bahaha: dont think so.

My car runs better with my stock bov on than when i had my blitz one on.

Link to comment
https://www.sau.com.au/forums/topic/12265-which-bov/page/2/#findComment-233818
Share on other sites
inark Grand Master

inark

Posted
Posted

bovs... why not get some LEDs?

blocking that hole... hmmm i dont know much about that kind of stuff but common sense tells me that if nissan put a hole to release boost pressure im sure they did it for a reason...

im running "14" psi at the moment.... it peaks to 14psi @ 4200rpm then drops almost instantly down to a steady 10.44 by 6000rpm.

now im no mechanic, nor am i performance expert... but im guessing if that pressure drop is eleviated by plugging this hole up... my stock turbo is going to give in.

can someone clear this up for me? someone that actually KNOWS not someone that is guessing or thinks.

Link to comment
https://www.sau.com.au/forums/topic/12265-which-bov/page/2/#findComment-236370
Share on other sites
JNR24 Proficient

JNR24

Posted
Posted
Originally posted by KDR33

Thanx for the feed back guyz, and all the help.. I was also wondering how could i get the cooler sound happening in my car, the sound which is something like Vooooooooodduudududu, i hear em mostly on VL's.  

BTW, inark as u said for the cruises, i would love to cum but most of the cruises here are in south western suburbs. im in northern suburbs and its prettie long way to get to the cruise meetings u have. if it was in city or somewhere close to the city, it would of been great!

That Vooooodudududud sound is your turbo backspinning. See when you close your throttle, your turbo is still spining creating excess compressed air in the intake manifold. Once this air cant compress anymore in the intake, it then the air moves backwards, (back through the intercooler, and out your airfilter.)while your turbo wheels are spinning backwards & forwards really quickly. thus creating that Vooooooouddududu sound :P

These noises sound f*%&n sick, and are relativley harmless on low boost (1BAR & under) but keep in mind nissan has provided the car factory with a BOV for a reason. Mainly to reduced turbo wear & provide Faster spool times between shifts/gears (because the turbo doesnt have to "re-spool" as much between shifts.

If i wear you (original person who wants to change BOV), i would purchase a more accurate "plumback" (You dont want attention from the cops, youl get enough just driving a skyline) BOV for further down the track like a G-ready. Stock BOV perform very average after the factory boost setting of 7-9 PSI as the spring tension on the factory BOV is set to open on 7-9PSI. Allthough it will still work after this setting you will find that boost will come on quicker with a aftermarket BOV (like gready) as it will not "leak" boost all the way to 15PSI. (unlike the factory, under 15PSI)

Link to comment
https://www.sau.com.au/forums/topic/12265-which-bov/page/2/#findComment-239700
Share on other sites
poyz Proficient

poyz

Posted
Posted

I've got an old Blitz.

Originaly had it venting to atmo (trumpet and all). Car ran fine.

Now its plumbed back. Car still running fine. No noticeable improvements, just a tiny bit quieter.

I suspect I have a VERY STIFF spring. Even at 1.4-1.5 bar the bov will open with a loud woooosh then flutter after the initial piston opening up.

Link to comment
https://www.sau.com.au/forums/topic/12265-which-bov/page/2/#findComment-239747
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...