Jump to content
SAU Community

Car Troublez, Post If U Have Any Advice......


Recommended Posts

im in a bit of trouble, atm, i may need sum parts for the r33 gtst. may need front control arms and steering mechanism. after a lose into a ditch.

stupidity prevails, that is why this situation eventuated.

if u have any advice to help plz post, if not, dont bother, with it.

yeah.. hopefully it's not too major.

but kjb_r33 is right, ebay isn't always a bad place to look for skyline miscellaneous parts. I picked up a set of spare lower arms for my r32 the other day for a silly price, just in case.

In this situation you've basically got lower control arms, upper control arms, tie rods, and at worse steering rack that need to be inspected and/or replaced. Each are usually a couple of hundred bucks. As long as you haven't bent the chasis, I wouldn't imagine it costing more than $1000 to replace what needs to be replaced.

yeah well i dontknwo abotu the chassis yet, when i try to drive it forward and back, it makes a terrible scraping sound near the rear brakes.

hey its chris with the 4door white one if you need anything i might be able to help. :D

yeah, i know im gonna be up for a bit. just dont know what yet. waiting on getting it to the mechanics so we can look at it.

You can come down to my workshop and throw it up on the hoist, then we can see what wrong with it.

You can come down to my workshop and throw it up on the hoist, then we can see what wrong with it.

yeah thanx for that. i wont be able to do anything till saturday anyway, and it wont steer so i cant drive it, has to be towed. il let u know anyway when i decide what to do with it. ok. thanx sam.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...