Jump to content
SAU Community

Recommended Posts

Hey guys my R32 has developed a little annoying problem, i am aware that the speedo is connected via a metal wire from behind the surround and there seems to be a clicking at least every second when i'm going down the freeway, usually doing over 110km/h it will just keep ticking. Has anyone else had this problem or knows how to fix it without ripping my whole dash apart? Also had a search couldn't find any perviously related topics. Any help would be appreciated :(

Cheers,

Rhys

Mine does the same, I just assummed it was my keys tapping, its rather irregular and I have a metal keyring... I might try holding onto my keys next time I hear it - and keep watching this thread :(

its actually part of a what is now defunct speed warning chime. they dont seem to last..

do a search for it and u'll find some info on it.

mine does the same, its dying, sounds like a cat being hit with baseball bat...(not really) but u get the idea... search function is your friend!

  • 2 weeks later...

I found this info on another site. I haven't tried it yet.

http://www.skyline-nissan.net/home/p2_articleid/21/s//amp;

- Remove the plastic panels under the driver's side dashboard.

- Drop the steering column (using the height / reach adjustment)

- Remove the instrument cluster. The small aluminium box on a bracket behind the

cluster is the noisemaker. Be very careful with the speedo cable – there is a plastic

sleeve than is prone to splitting where the cable enters the back of the speedometer. It

can be fixed with some heat shrink tubing or at a pinch some PVC tape.

- Disconnect the spade terminal, and remove the dingdong box. Peace at last.

Hope this helps.

Cheers

  • 4 months later...

aha, just discovered this thread having been working on my r32 gtr.

since i bought her i've had this ticking noise behind or in the dash cluster. it sounds like, to me, a box full of cockroaches running around inside. the noise happens regardless of the speed at which i'm travelling.

having taken my dash apart, i am 90% sure it's the speedometer cable making the clicking noise because i can localise the sound to the cable when the dash is off. it's the only thing clicking. i do not think it is a speed limiter.

speedocable.jpg

anyone else have this?

Edited by sigsputnik
I found this info on another site. I haven't tried it yet.

http://www.skyline-nissan.net/home/p2_articleid/21/s//amp;

- Remove the plastic panels under the driver's side dashboard.

- Drop the steering column (using the height / reach adjustment)

- Remove the instrument cluster. The small aluminium box on a bracket behind the

cluster is the noisemaker. Be very careful with the speedo cable – there is a plastic

sleeve than is prone to splitting where the cable enters the back of the speedometer. It

can be fixed with some heat shrink tubing or at a pinch some PVC tape.

- Disconnect the spade terminal, and remove the dingdong box. Peace at last.

Hope this helps.

Cheers

That will fix the ticking noise as it is the over 100kph speed chime thing....

in my case the ticking noise occurs regardless of the speed at which i'm going - usually much less than 100 kph...any ideas?

i would reckon that it is still the stupid little silver canister that is to blame.....

just rip out the dash and remove the little f*kker and that should fix it...

otherwise it will most probably be the speedo cable.

good luck :rofl:

  • 14 years later...
On 18/11/2006 at 10:45 AM, sigsputnik said:

aha, just discovered this thread having been working on my r32 gtr.

since i bought her i've had this ticking noise behind or in the dash cluster. it sounds like, to me, a box full of cockroaches running around inside. the noise happens regardless of the speed at which i'm travelling.

having taken my dash apart, i am 90% sure it's the speedometer cable making the clicking noise because i can localise the sound to the cable when the dash is off. it's the only thing clicking. i do not think it is a speed limiter.

http://users.tpg.com.au/adslv24i/speedocable.jpg

anyone else have this?

trying to revive an old thread here.. I have a sound that comes intermittently from my r32 gtst dash (in winter only..) at driving speeds only. Makes a nightmare to try diagnose and it can only be described as a box full of cockroaches running around exactly as Sigsputnik has said. My overspeed chime seems to be working fine. Did you find out in the end what the problem was?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...