Jump to content
SAU Community

Recommended Posts

I use the Castrol Synthetic R 5w-30, will be switching to the Castrol EDGE 5w-30. Its the best oil i can get off the shelf in Broome, and i got my last bottle of synthetic R for $65. I recommend the Synthetic R, and the EDGE is supposed to be better.

Its a daily driver, just cruising no thrashing, done about 130,000 kms. Engine is in fine running order, going to be interesting when i open it up for a rebuild in another 15,000kms.

cheers

Evil

I've ran castrol 5w30 in the past, I found the motor used a little of it over the 5k period.

The usual motul 8100 5w40 it doesn't use a drop. I've also ran castrol 10w60 (oil pressure was simply too high) and Mobil 1 5w50 they too didn't use a drop.

I've found that Mobil and Castrol tend to go "used" prematurely - you start burning oil after 3000km because it's worn out.

Motul 8100 is brilliant stuff and always lasted me 5000km without using oil. Also, 10w60 is too thick for street use IMO.

It all depends on your driving and how many kays the cars done.

We stress too much about oil...

Grab what ever good oil you want it won't make or brake it.

I've never had issues with either mobil 1 or castrol not lasting 5000km's, I have however had issues with oil being used when its a 5W30 oil, 5w40 is fine and the lowest I would go.

personally i think the 10W60 is too thick. far better to choose a good synthetic ester 10W40. and yes i have used the castrol 10W60. personally i think motul chrono 300V 10W40 is excellent stuff, but I will know more after the next analysis.

Beer Baron,

Have you done an analysis on the castrol 10w60? I'm keen to see whats in it, being if castrol skimp on moly and what not. ;)

I did one on it (castrol formula R 10W60) about 3 years ago, but i'm not the sharpest tool with oils and ingredients etc. Just wanted to see how the engine was really. from memory my mechanic that read the results said it was ok, but nothing out of the ordinary. and i still think it's too thick. there is no need for a 60. maybe if you do track work and a too tight for an oil cooler running the really thick stuff may be a bandaid, but providing you keep oil temps in check with an oil cooler i think 10W40 is fine.

I'll post up the results on the chrono 300V. my instinct tells me the results will be good :laugh:

Castrol doesn't use Moly from what I've seen. No big deal though, Moly is overrated. 300V has the highest moly concentration I've seen.

Kinks, how do you know the oil is 'worn out'? Just by looking at the color, it doesn't tell you anything.

Natrually Cubes you wouldnt have used a drop of the Castrl 10W60 or the M1 5W50 because they are thick as :kiss:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...