Jump to content
SAU Community

Recommended Posts

Just found what id like to think is a bargain. Its an r32 gtst, manual with an RB25DET standard. It only jumped off the boat a couple of days ago and after taking it for a drive in "off the boat condition" it drove and sounded quite good. It has just over 100 000km and had the timing belt replaced. Also many scratches and a couple of dents that are promised to be fixed up. I wont tell you the price offered but its similar to what it costs if you import a normal r32 gtst through prestige.

Is there anything i should look out for as at that price their is a good chance something is wrong with it. Its in Melb and is being sold through a compliancer/importer. Any info would be great! including what the rb25 spec has over the rb20 (diff suspension etc...) Thanks

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/
Share on other sites

Dude..

One thing that I am quite sure of is that the R32 GTST NEVER came out standard with a RB25DET.

The very late ones did come with an RB25DE but never the non turbo.

So it is not a standard car in that sense.

As for what the RB25DET has over the RB20DET...

RB20DET

157KW

263NM (I think..)

RB25DET

187KW

297NM (I think..)

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-24950
Share on other sites

Nah it isnt j-spec. But whats the lowdown with them, are they ok? Havent checked them out yet but im assuming there the sort of place that sell run of the mill stuff for top dollar.

I had never heard of a rb25 32 either until this one.(whether it really is std dunno, just what salesmen told me) Also must ask about RUST! had a few tiny littler spots under the hood, top of the struts, under the skirts too and also was told a bit of water came out of the boot when i cornered. Didnt open the boot but guessing its just rain water. How much should rust affect the decision of buying this sorta car?

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-24987
Share on other sites

rust should tell you to keep away from the car a small amout is ok but water from the boot indicate rear end accident the one way to check if its a factory 25 det which I doubt is to check the compliace plate on the firewall it will have the engine there generally they are rb20de or det or rb25 de.

make sure its not too rough. you can get good r32's for 12-14k.

also make sure they will register the car for you as its not the factory motor could cause hassles.

meggala

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-24989
Share on other sites

they did make them with rb25det about 2000 at the very end, part of trailing the motor ready for the new skylines as well as just a bloody good idea. I guy i know in japan has one rekons they really go good!!! Plus an importer confirmed that they are real as he showed me one he was bidding on and it had the engine and chassis numbers on the sheet and they said rb25det!!

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-25114
Share on other sites

From memory Nissan made about 47 R32's with the 25t motor, this was in the last month before the R33 was introduced. I've seen one myself, and was thinking about buying one a couple of weeks ago (workmate's brother has one...about NZ$5,500)

I recon they would be a great ride.

Other than that, the naturally aspirated R32 GTS25 is quite common here. They drive quite nice.

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-25744
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...