Jump to content
SAU Community

Recommended Posts

hi guys

ive recently bought my car a r33 gts t ive got some pretty basic questions because i dont no alot about these cars first can someone tell me the best oils to use??

on the dash there are little led lights for hicas slip a-lsd abs i think whats the go with these if they light up does that mean there working or not because the hicas and a lsd light up just out of the blue when im driving ??

with the a-lsd is this a proper lsd or a viscous because sometimes only one wheel spins not very often but yea i think thats bout it so if anyone could answer these that would be great

cheers

Link to comment
https://www.sau.com.au/forums/topic/123766-can-someone-help/
Share on other sites

If your hicas light comes on it means its not working or having some mid life crisis.

If your alsd comes on it means that its engaged and is working. Alsd means active lsd and is nothing like normal lsd's they use a separate hydraulic system to activate the parts inside the diff that are lsd.

I used to have the A-LSD version skyline. This feature was an upgraded option when bought new and cost quite a bit extra to get.

This model of skyline with the upgraded options are often referred to as a V-SPEC model.

Search the forum for A-LSD and you will find a wealth of information, it has been covered many times before.

I used to find that my A-LSD light would come on if there weas a fault (particularly on a dyno or something). The slip light will come on everytime the computer senses that the two wheels are spinning at different speeds.

You should also have an extra computer underneath your parcel shelf in the boot as the diff also runs it's own stand alone computer.

ok thanks guys so is the a lsd a good thing and whats the go with v spec is that also a good thing ive really gotta learn about this damn car i dont have a clue about most of it i just enjoy driving it haha yea i think there is a extra computer in the boot is that what your talking about

ok thanks guys so is the a lsd a good thing and whats the go with v spec is that also a good thing ive really gotta learn about this damn car i dont have a clue about most of it i just enjoy driving it haha yea i think there is a extra computer in the boot is that what your talking about

Best thing to do is to search the forum for information, that's the best way to learn. Theres no point in me writing everything out again when it's already spelt out on the forums.

All of those lights mean there is a fault if they are on...except slip, that just means you are breaking traction :D (Mine didmt work but :( ) Do you have an after market steering wheel?? This can cause issues for A-LSD and Hicas...the A-LSD comuter is located in the boot there is a red light on it that will flash an error code if the dash light comes on...get the number of flashes then search this forum and it will tell you what is wrong

The A-LSD will not spin both if it is not functioning....However if it is only a momentary spin in a tight corner I found that mine did not spin both...I think this is programmed in

As for oil I like Penrite 5w60....motul turbo light nearly killed my engine :rofl:

And for gearbox and diff go for redline shockproof :D really expensive but really really good

How so Andy? What did it do? Was this the 33 or the 32? :D

not2.5 r33, for your info I use Motul competition oil for the engine.

It couldnt take heat and it broke down to become a black water like substance..providing no lubrication at all...I still have it at home I will show you one day...it was in the R32

ok thanks heeps guys and i dont have a aftermarket steering wheel but it looks like it has been taken off recently because its out of alignment also where do i check the level of fluid for the lsd if this is even possible ive tried searching this site but i havent been to lucky yet

so thanks for the info

cheers

ok thanks heeps guys and i dont have a aftermarket steering wheel but it looks like it has been taken off recently because its out of alignment also where do i check the level of fluid for the lsd if this is even possible ive tried searching this site but i havent been to lucky yet

so thanks for the info

cheers

Aha! Get that steering wheel fixed up and I am pretty sure that will solve it! The steering wheel has steering angle sensors in the bottom of it and there are some in the boss. If they are not aligned properly you will get faults in the HICAS and the A-LSD as that information is used by these two systems to decide when and when not to be active

The fluid for the A-LSD is in the boot on the right hand side there is a little flap in the lining ou can open and you will see the canister there

For hicas also, theres a sensor in the steering wheel that can sometimes loose it's connection if it's not moved for a while... Example, driving on a freeway and making very little to slight turns. My Hicas light used to do this. It wasn't doing any damage, just came on.

The could be quite a few reasons, best bet would be to get it data streamed and see what faults are coming up. Not many places have the data streamer, mainly Nissan Caryards IIRC. Although, Gavin Wood does have one.

That's how all my faults were diagnosed when I first got the car, hicas light came on after driving for like 2 minutes and stayed on. Turns out that a wire between the speedo and computer had been cut so the computer wasn't getting the signals. Along with hicas, abs, speed limiter and many other things weren't working.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...