Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive got a 1995 r33 GTS-T

Just wondering if anyone has come across a similar broblem as mine....

the car dirves fine for a few minutes, then out of nowhere loses most of its power, the revs drop between 500-1000rpm during idle and it seems like its hunting!

Then 2 minutes later it will be fine again and drive as good as new?!! :cool:

I've been told it could be anything from a faulty injector/fuel pump/spark plug/coil/airflow meter!

I dont want to go changing all these parts as obviously all of them cant be faulty! (i hope)

does anyone have any advice as to what it might most likely be?

Link to comment
https://www.sau.com.au/forums/topic/124015-problems-with-my-r33/
Share on other sites

sounds like a vaccum leak , during idle if fluctuates thats normally the cause , check all you cooler piping

also how old are your spark plugs? Have you gapped your spark plugs to 1.1mm or if boosted 0.8mm?

Edited by mr_crust
  mr_crust said:
sounds like a vaccum leak , during idle if fluctuates thats normally the cause , check all you cooler piping

also how old are your spark plugs? Have you gapped your spark plugs to 1.1mm or if boosted 0.8mm?

yep all the piping is secure and its running standard boost (never been boosted)

i've purchased a S2 airflow meter... as ive been told that is the most probable cause!

I will let you know if it fixes the problem.

thanks

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...