Jump to content
SAU Community

Recommended Posts

  • Replies 238
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

well berowra waters is 2 mins from my house lol

I'll meet you in galston! lol

Free case of beer for whoever can make it onto the Berowra gorge ferry/punt without ripping off their front bar (never been happier to have a standard bar right now) >_<:wave::(

Galston/Berowra Gorge = Australian version of Mt Akina.

I grew up in Galston...so in a way my life is very similar to Takumi....but instead of delivering Tofu I was delivering the Hornsby skanks but to Horsby station. (ahhhhh memories)

Free case of beer for whoever can make it onto the Berowra gorge without ripping off their front bar (never been happier to have a standard bar right now) :wave::(:D

Consider it mine...

Guys, I'll be in the white 4WD - thank god for adjustable ride height! >_<

nath are you from arround the ctown area?

Yeah mate,from Currans Hill, do you wanna meet somewhere and go from there? i see some people are meeting at casula then going to homebush, but rather just go straight to richmond from here, save an hr driving there then to richmond.




  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...