Jump to content
SAU Community

Recommended Posts

It is a factory option

But you loose it when it gets complied, unless you swap your headlights for a standard set before compliance

That is what I am doing at the moment with another Stagea owner

I think you mean lose

i was told by nismo that you can re install them after compliance and they will give me instructions how to and send the original parts back to me with the car if i so request when mine goes to them for compliance .i spose time will tell

i was told by nismo that you can re install them after compliance and they will give me instructions how to and send the original parts back to me with the car if i so request when mine goes to them for compliance .i spose time will tell

That's what they did to mine.

I can't believe how pathetic and yellow looking, standard lights are when you've gotten used to Xenon's.

Would be peeeerrrfect if the made the high beam spots xenon as well.

my question is why do they kill the xenon lights? especially when they are coming out as standard equip on bmw's and the like?

also does anyone else have the light height adjustment wheel down to the right of the steering wheel? and if so is it hooked up/does it do anything? as mine doesn't seem to do anything at all.

BTW guys,

i saw a thread in for sale section in the forum. The guy is selling HID kits for $350!! German components assembled in china though. 1 yr warranty. Do you guys know naything about this?

http://www.skylinesaustralia.com/forums/in...howtopic=125314

Also does our headlights uses H1 bulbs?

honestly, all aftermarket HID kits are shit. German parts assesembled in China ey. Let me tell you a story.

There is a company in Ballarat, it sells pots which are "made in australia". These pots are actually made in Malaysia, imported to australia and stickers put on them which say "made in australia"......think about it though.....the stickers ARE made in Australia....

the only way to get true HID's is to retrofit a headlight with OEM projectors. The standard headlamps if they are arnt designed to work with HID's just wont be good with HID's. I am sure S2's will be fine, but i am not sure I can say the same about S1's.

There is a really good website on my other computer, ill try and post it when i get that computer working again.

honestly, all aftermarket HID kits are shit. German parts assesembled in China ey. Let me tell you a story.

There is a company in Ballarat, it sells pots which are "made in australia". These pots are actually made in Malaysia, imported to australia and stickers put on them which say "made in australia"......think about it though.....the stickers ARE made in Australia....

the only way to get true HID's is to retrofit a headlight with OEM projectors. The standard headlamps if they are arnt designed to work with HID's just wont be good with HID's. I am sure S2's will be fine, but i am not sure I can say the same about S1's.

There is a really good website on my other computer, ill try and post it when i get that computer working again.

then how much for a oem projector do you know alex?

my question is why do they kill the xenon lights? especially when they are coming out as standard equip on bmw's and the like?

also does anyone else have the light height adjustment wheel down to the right of the steering wheel? and if so is it hooked up/does it do anything? as mine doesn't seem to do anything at all.

Mine has the light height adjuster and it does work - didn't think it did at first but one night tried it out again (out of boredom) and noticed they move up and down (subtle but they do move)

Would all S2 Stageas have had the Xenon's removed - would there be exceptions?

Cheers, Al

Mine has the light height adjuster and it does work - didn't think it did at first but one night tried it out again (out of boredom) and noticed they move up and down (subtle but they do move)

Would all S2 Stageas have had the Xenon's removed - would there be exceptions?

Cheers, Al

All Stagea's have to have the zenon's removed at time of compliance

The reason being they are not self leveling like the BMW's etc.

Which means the BMW lights should not shine in the eye's of on coming cars, but they still do!

The dial on the dash in the Stagea is designed for fine in cabin adjustment, for when the car has additional weight in the rear which causes the front end to rise, but unfortunitly this systems does not meet ADR's so the zenons have to be removed.

IAMSHE who is compling my car along with many other people's cars, has told me they have to cut the zenon bulbs wiring out and they are not re-usable.

So I am not sure how NIZMO do it.

Best way is to borrow a standard set for complinace and keep your zenon's, esp when they are approx $3000 new!

But you could get defected :O

cool thanks for explaining the reason behind the removal.

i was curious because i have a set of small triangular plugs floating around behind each headlight and was wondering if thats what they were for? they are 3pin plugs with the following coloured wiring

black

blue with white stripe

blue with red stripe

if anyone can tell me what they are for would be awesome?

the part number on the rear of the plug is 11016N6 if this helps?

Thanks Darrin for explaining that one. Another example of our design rules being rather unique, just like that dimmer switch for the dashboard lights that has saved so many lives :dry:

Just a shame the Xenon's had to go. I got my car from a dealer so no chance of saving them like you are doing

Cheers, Al

SO whats the easiest way at the end of the day for me to keep my OEM xenons?

I had them on my strawberry and I can't live with out them!!

DO I just tell the compliance workshop that you can take them out completely and i'll supply OEM headlights for it?

or if i was to borrow a standard set, would I have to do it behind the compliance joints back so to speak?

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...