Jump to content
SAU Community

Recommended Posts

Hey guys

I was just wondering if anyone knew a cheap thing that i could hook up to my silvetop ecu so i can get all the data to show up onto my computer.

I would like to measure my AFR against my RPM and just stuff like that.

I was just wondering if there was something out there besides an aftermarket ecu

Thanks

What you want is a usb->consult cable and the conzult software, runs on any windows PC. Great for diagnostics and simulation, does contain not to be toyed with if you don't know what the ramifications are though...

Google nissan consult conzult

What you want is a usb->consult cable and the conzult software, runs on any windows PC. Great for diagnostics and simulation, does contain not to be toyed with if you don't know what the ramifications are though...

Google nissan consult conzult

Thanks mate

Have you used this before?

Do you know where i can buy it?

And do you know where it plugs in?

Thanks

The plug connects to the consult port - in the R34 it's under the dash near the bonnet release.

I have the software courtesy of a mate, I believe he got it from the oz 300 forums

I have used it, another mate has used it for constant analysis after burning his own rom chip (for track fuel mappings etc). It's quite good for live and logged data

The plug connects to the consult port - in the R34 it's under the dash near the bonnet release.

I have the software courtesy of a mate, I believe he got it from the oz 300 forums

I have used it, another mate has used it for constant analysis after burning his own rom chip (for track fuel mappings etc). It's quite good for live and logged data

Sounds like its just what i am after

Do you know of any shops that stock the unit?

Thanks

I use my laptop with a USB consult cable... doesn't show AFR's though, you'd need a wideband sensor and some other hookup to show that. If you just want rich/lean, it will show that much.

Other alternative I was looking at is the Apexi i-moni. It's available from nengun, and plugs into your consult port... shows all that stuff. Pretty cool and a few hundred bucks.

Yeah I used my mate blatz usb cable on my car many times with great success.

It is by far a sweet bit of hardware and software.

U can even use it for fuel and ign map tracing etc. though this only works on the later R32 ecu model MEC R212 B. (RB20DET)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...