Jump to content
SAU Community

Antenna

skylinesome

By skylinesome,
in Car Audio & Electrical

 Share

Recommended Posts

RANDY Veteran

RANDY

Posted
Posted

LOL! My car arrived with a Sanyo CD player, and the same thing happened.

I got my new head unit, wired it all up (correctly) and now it only goes up with radio.

Might want to check your wiring, the bodgy person who put the first one in ran the antenna wire to the head unit's remote wire. (used for switchin on amps) That made it go up each time.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2316127
Share on other sites
RANDY Veteran

RANDY

Posted
Posted (edited)

omg lol wtf!

Ditch that head unit! What kind of HU doesn't have a power antenna wire??

My first ever headunit was a Kenwood, bought for $40 from Cash Converters... about 6 years ago, and it was already a few years old at the time. IT had a power antenna wire!

Edited by RANDY
Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2316725
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Did you install it yourself? Have you checked the wiring?

Make sure your remote wire is not touching anything (unless you run an amp, in which case it should only be connected to the amp remote wire)

I'm pretty sure that Pioneer wouldn't design it like that, and i'm very sure that R33's antenna's don't do this on their own.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2318700
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

I will re check everything. When you mean make sure the remote wire isnt touching anything, do u mean that is should be connected to the remote power antenna wire coming out of the head unit?

or should i wire it so the wire for the antenna coming out of the car goes to nothing.

Did you install it yourself? Have you checked the wiring?

Make sure your remote wire is not touching anything (unless you run an amp, in which case it should only be connected to the amp remote wire)

I'm pretty sure that Pioneer wouldn't design it like that, and i'm very sure that R33's antenna's don't do this on their own.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2319571
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Umm.. the remote wire FROM the HU:

If you have an amp, make sure it's connected to the amp's remote wire.

If you have no amp, that wire should be taped up and tidied so that it doesn't short on metal or anything. It should NOT be connected to your antenna wire (factory loom side).

The HU should have a "p.cont" or "antenna" or something wire... this is the one for the antenna. I'd be shocked if a modern HU DOESN'T have an antenna control wire.

I might have made that unclear...

HU "Remote" wire -> nothing

HU "Power Antenna" wire -> antenna power wire in the factory harness

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2321359
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

ok so let me get this striaght. The wire that powers the antenna goes to nothing.

And then the actual antenna wire just plugs into the head unit as normal.

If that is the case i dont see how the antenna will power up at all???

What i have done for the mean time is just wired it to the switch next to the a/c unit.

I might leave it like this so i can control the antenna even when i have the radio on.

Umm.. the remote wire FROM the HU:

If you have an amp, make sure it's connected to the amp's remote wire.

If you have no amp, that wire should be taped up and tidied so that it doesn't short on metal or anything. It should NOT be connected to your antenna wire (factory loom side).

The HU should have a "p.cont" or "antenna" or something wire... this is the one for the antenna. I'd be shocked if a modern HU DOESN'T have an antenna control wire.

I might have made that unclear...

HU "Remote" wire -> nothing

HU "Power Antenna" wire -> antenna power wire in the factory harness

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2322766
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

ok after reading it agian it makes sense. My bad

But that is how i have wired it but the antenna still comes up when playing a cd.

ok so let me get this striaght. The wire that powers the antenna goes to nothing.

And then the actual antenna wire just plugs into the head unit as normal.

If that is the case i dont see how the antenna will power up at all???

What i have done for the mean time is just wired it to the switch next to the a/c unit.

I might leave it like this so i can control the antenna even when i have the radio on.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2322779
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Ah ok.. and yeah, the wire that you referred to is not actually an antenna power wire, it's the remote wire for an amp.

The antenna itself is powered via wiring in the boot.

Very odd that this would happen. 100% sure that you haven't got the remote and the antenna wire switched around?

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2323986
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • tidi0x
      Wheel Sizes & Offsets For Skylines

      By tidi0x · Posted

      Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...