Jump to content
SAU Community

Recommended Posts

guessing you want a larger plenum volume than stock, but have you seen this thread?

http://www.skylinesaustralia.com/forums/in...howtopic=124555

modified standard plenum, looks to be a good job too!! only $300...

guessing you want a larger plenum volume than stock, but have you seen this thread?

http://www.skylinesaustralia.com/forums/in...howtopic=124555

modified standard plenum, looks to be a good job too!! only $300...

Yeah saw that thread, but his plenium is just a cut and shut... I could do that in under 2 hours and would cost me nothing... But i did llook at it...

Ive got the the bottom half (the runners) if you want it

That would be awsome. Its the bottom i really need to get the base plate laser cut for the project. Let me know if i can borrow it or what you want for it.

good luck i can get them made cheaper than that.

"You get what you pay for"

Damn gorden... Bastard...

Anyways all other users i would like a top half please and if you have a bottom also you want to get rid of for a few weeks and its before next friday then you can save sirskyline the effort...

Anyways please post up if you can help out...

Cheers Col



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...