Jump to content
SAU Community

Recommended Posts

if your buying a car straight off an importer, ask to see the AUCTION sheet, which shows the millage of the car when it left japan. no sheet = no buy if you ask me.

Even if the car comes with an auction sheet you cant be sure the Kms are genuine. When importing a car from Jap you just have to accept the fact that the car's speedo might have been tampered with, thats why you cant really rely on the millage.

Jaker34 the silver 34 looks nice goodluck with it mate, make sure you dont buy a lemon.

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

thanks Jun

i already had a mega lemon with my last car so im hoping that my bad luck is gone with car ey.

Joel, the guy sellin the car seems pritty lagit and has had no problems carring out all the test on the car i have asked for.

he sent me the action sheet and was a grade 4 car when it left japan and the KMs to me seem genuine for the look of the car.

i am getting a RACQ test, they are called something different in ACT but im gettin that done at no charge to me, and he is most likely going to ship it up to brisbane for the price we agreed on which was 25 000 flat. im flying down next saturday to test drive and view the car. i live in brissy by the way. there is really nothing up here that is even as close to the quality of this car including KMs and body.

i dont mind traveling do see it, so hopefully by the end of next week ill own it. im excited.

Edited by Jaker34

Just noticed the pics of the one is ACT you're lookin at. Just be aware that it has snow/winter tyres on it, and may have been used on salted roads, = rust. JDM cars don't have good rust protection, and it usually festers between panels to come out and bite you a couple of years down the track.

oh yeah

im not borrowin the cash anymore,

i eneded up earning enuff this year in my family company to be able to afford the car under the company, which is mega sweet, low repayment costs and ill own it in 3 years or so. so thats awsome

its under a lease agreement.

hey all

just checked out that R34 over at SM, its a piece of crap, the guy pritty much came out and told me it came from japan with no front bar and no head lights, the hood didnt open properly, which is why i think it was involved in an accident.

it had interior panels missing, brake and clutch pedals were mssing down to the metal, seat was worn, and stains on left hand seat. and he was asking 30 000 for it. rust on the pipe from the intercooler. not a good one at all

anyway just thought id let ya know, watch out for that one.

dont get it its been in a crash just lettin ya know

I know of one company that lets you lease cars that are 8 years old at the end of their lease, so you could potentially lease a 2001 model R34 for 2-3 years (or a 1998 model for a bit over a year)

yeah ive found one

its a 98 with 30 000 on it, genuine 2, had it checked, but he already has a byer he promised the car.

the thing is the buyer doesnt have his money and i do, he didnt lay down a deposit or nuffin. nice car, the wheels are a bit old skool

the other good thing is he lives like down the road from me, i never seen it driving around so i know he hassnt drivin it much.

had a jap head unit in it tho and all the buttons are in jap, no big deal tho.

im so hopin that the other buyer drops out, coz i got the money and deposit waitin for him. i been hasselin him a bit so im just gunna let it ride now. coz when im in the market for a car and dealer hassel me i get pissed off lol.

anyway crossin my fingers hey thats it down the bottom, see what i mean by the wheels. they do look better in real life,

post-30506-1153839262.jpg

Edited by Jaker34
Even if the car comes with an auction sheet you cant be sure the Kms are genuine. When importing a car from Jap you just have to accept the fact that the car's speedo might have been tampered with, thats why you cant really rely on the millage.

Jaker34 the silver 34 looks nice goodluck with it mate, make sure you dont buy a lemon.

its not just to do with milleage although if there is a question mark next to the kays then you got to be sus.. the auction inspections are very thorough, they normally outline if there has been accident damage ect..

hey guys

the guy with the white r34 sold it to the other guy which sux

im goin to view a black one over the weekend it has 56 000 on the clock tho which isnt to bad hes askin 29 500 tho and for 56 000 i dont think that suits so i offered him 26 000

see how it pans out

hey ya'll

Im Pritty EXCITED!!!

put a deposit down on my 34 today. white one, from aussie car complience, went down today and test drove and pritty much pulled it apart checked everything. plugs, filters and fluids were all changed when it hit aussieland brand new. the only thing was that it didnt have a gear nob, they floged it at the dock, but joel is givin me an aftermarket chrome one so thats sweet.

alarm and turbo timer, panasonic mp3 player and alpine componet speakers in the front and coax's in the back,

Short Shifter and aftermarket locked diff and some eyelids

umm i think thats about it. everything else was standard which is a good thing. first thing is the exhaust which is $940 mild steel tho, painted with stainless cat and cannon. so not 2 bad. im contemplating savin the extra cash and gettn a full stainless but we'll see.

and a pod as well, think im gunna get the blitz pack that comes with the heat sheild. so that should work out pritty well.

Joel was awsome, i reccomend him highly, he let me pritty much pull the car apart and he never said a word. let the quality of the car speak for itself. he flew me down to view the car and back no charge, and shouted me lunch haha

so now i am just waiting for my new ride to arrive once i get payment through to him through my business. he said it should be mid week next week which is awsome. i bet its gunna feel like 2 months haha

i never knew that 34s had so much balls. i had never drivin one hard until today and i was suprised man it was awsome. and with the locked diff u could really feel it punch u into your seat.

anyway this is gettin to long so thats it

hope to be seein some of ya's on a crusie soon ey

Jake

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...