Jump to content
SAU Community

Recommended Posts

G'day guys.

These are from Import Car Parts Plus in the USA.

GB: START 18/07/06 ENDS 10TH/08/06

Im in need of some cam gears and so are 2 mates. These things are so dam expensive for the Jap brands.

What i found was some Arospeed USA RB20/25/26 Cam Gears.

Here's all the info on them - make sure you read all of this cause it'll probably answer all your questions.

These camgears are good for a RB20, RB25, RB26.

To keep the price down, I need to order 10 sets thats 20pcs in total. (Come only in Blue Colour)

How to get onto this great deal"

You can do direct deposit into my account then I'll express post them to you. Both ways are fully tracked so they won't go missing.

Express post cost an extra $10 nation wide.

Cost Price of the cam gears is $170 for the pair, or $85 for 1 pc.

So total cost for a pair will be $170 + $10 postage = $180

This gb will end in about a month or before if we can get the numbers.

Ordering To order a pair, just put a post up here or you can PM or send me an email at [email protected] with your details.

Feel free to ask me any questions.

Also this is a price break i was given if more than 10 pairs are ordered.

10 - 15 pairs $160

15 - 20 pairs $150

20+ $140

Lets hit the 20+ and save!!!!!!

Come on SAU members, im sure we all need camgears and if we can get them for $70 each gear that will be a huge saving.

These are made out of the following material and only come in blue.

RACING ADJUSTABLE CAM GEAR : al7075 forged billet

This is the list we have currently.

1) R33KID *IN

2) 2GU UP *IN

3) R33 STAGEA *IN

4) xRHETTx *KEEN

5) AWDMAT *KEEN

6) JIMx *KEEN

7) Siddr20 *KEEN

8) 180 mph *IN

9) Jaqule *KEEN

10)Tangles *IN

11)Kozeyekan *IN

12)NICKS33 *IN

13)stolen *IN

post-27391-1153135671.jpg

Edited by r33kid
Link to comment
https://www.sau.com.au/forums/topic/126510-arospeed-adjustable-cam-gears-pair/
Share on other sites

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

I'm keen for a pair. And i'd like to see some bigger photos aswell, i couldnt find any details of RB camgears on www.arospeed.com

Some Info i was given from the supplier in the US.

Arospeed announces that it has created a five-bolt design for easy Tru-Time Adjustment.

Arospeed cam gears with an updated design.

Arospeed Adjustable Cam Gears are used by top racing teams across the USA and are a must for engines that are forced induction, high compression and/or utilizing aftermarket competition cams. Our gears enable users to match cam timing with their vehicle's tuning state by advancing or retarding the cam profile in two-degree increments via true laser-etched markings. Precision-cut gear teeth ensure no premature wearing of the belt surface and hard anodizing on the gear teeth is lab-test-proven to be the hardest anodizing process on the market

Key Features:

Increase horsepower and torque without any cam changes, and are ideal for heavily modified engines

CNC-machined from AL7075 billet aluminum

True laser-etched markings on the leading edge of the gear allow for quick, accurate adjustments

Hard anodizing on belt surface is the most durable anodizing on the market

Grade-8, six-point hex bolts stand up to repeated adjustments and feature integral washer flange for greater load distribution

Hope this will answer all your questions.

post-27391-1153235741.jpg

post-27391-1153235768.jpg

post-27391-1153235787.jpg

post-27391-1153235823.jpg

Edited by r33kid

I'll have to re-check my finances when you do the order, but tentatively put me down for a pair (for RB26, don't think there's a difference?) It doesn't matter what the final cost is, I'm willing to pay the full $180 as long as I can afford it at the time. Thanks!

I could be keen for exhaust cam gear for r33.. So only need one..

When does the group buy end??

Also where are you located??

pickup ok??

Edited by siddr20
I could be keen for exhaust cam gear for r33.. So only need one..

When does the group buy end??

Also where are you located??

pickup ok??

Im located in Sydney, pick up is ok but im quite busy with work, typing this now from work, so its easy for me to express post

This is the list we have currently.

1) R33KID *IN

2) 2GU UP *IN

3) R33 STAGEA *IN

4) xRHETTx *KEEN

5) AWDMAT *KEEN

6) JIMx *KEEN

7) Siddr20 *KEEN

We need more ppl so pass the word around.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...