Jump to content
SAU Community

Melb R32 Gtr For Sale

Dr DRFT
 Share

Recommended Posts

SRS13 Proficient

SRS13

Posted
Posted

I am in the interested in the car, the graphs have concerned me sommewhat though.

How does it drive on the street? ie laggy? full boost by 5600rpm or roughly thereabouts - seems a bit laggy for GTRS' or is this normal for this type of set-up?. Could this be due to the cam profile (272's) being used?

Is that the final tune? AFR's dont seem steady across the range.

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
I am in the interested in the car, the graphs have concerned me sommewhat though.

How does it drive on the street? ie laggy? full boost by 5600rpm or roughly thereabouts - seems a bit laggy for GTRS' or is this normal for this type of set-up?. Could this be due to the cam profile (272's) being used?

Is that the final tune? AFR's dont seem steady across the range.

If you have been in any other GTRs I gaurantee you compared to this on it is not laggy. On the dyno is one thing on the road is another as it feels like no lag at all. With this much power you would not want full boost any lower or the thing would not be drivable. This is only a start as in tune. The motor was planned and built for big boost not a miserable 22psi... Honestly if I was to keep the car I would get a 4inch FMC then 2x Z32 airflows and more boost say 30psi everyday and 35psi when you wanna play...... :(

everyone who been in the car says it is definitley not laggy.... very responsive

as for AFR you got to compare what values are on top and bottom they printed it very large so it seems not as steady as some but like i said this was not supposed to be it. Only left it like this cause lost of licence no point Geeing myself up and playing with it more noing I cant drive it anymore. :P

SRS13 Proficient

SRS13

Posted
Posted
If you have been in any other GTRs I gaurantee you compared to this on it is not laggy. On the dyno is one thing on the road is another as it feels like no lag at all. With this much power you would not want full boost any lower or the thing would not be drivable. This is only a start as in tune. The motor was planned and built for big boost not a miserable 22psi... Honestly if I was to keep the car I would get a 4inch FMC then 2x Z32 airflows and more boost say 30psi everyday and 35psi when you wanna play...... :(

everyone who been in the car says it is definitley not laggy.... very responsive

as for AFR you got to compare what values are on top and bottom they printed it very large so it seems not as steady as some but like i said this was not supposed to be it. Only left it like this cause lost of licence no point Geeing myself up and playing with it more noing I cant drive it anymore. :P

Thats fair enough. 35psi is alot of boost but hey if the motor can handle it, why not?

what AFM's and intercooler is it running now?

your not planning any trips to Sydney are you, this is exactly what I was after. A white GTR, with a built motor and great power, makes it very hard when you are in another state :rofl:

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
Thats fair enough. 35psi is alot of boost but hey if the motor can handle it, why not?

what AFM's and intercooler is it running now?

your not planning any trips to Sydney are you, this is exactly what I was after. A white GTR, with a built motor and great power, makes it very hard when you are in another state :(

Standard AFM and 3inch FMC Its the only two things holding it back. As for a trip to syd??? I wish I cant even drive around here how am i supposed to get up there. If you looking for a good car this could be the one maybe you should get a one way ticket (virgin air) under $100 one way. 2hours later you could be driving home.

Seriously I have spent make that OVER spent on this car and how ever gets it will be a lucky person as there have been no short cuts at all...

A 32 GTR is a 32 GTR people forget that alot of the ones for sale out there will need a rebuild soon as people tend to trash them and it will cost them at least 8g just for a standard rebuild that on top of the 20g you got the car makes 28g for a standard car???????

mrchams Rising Star

mrchams

Posted
Posted

Can I ask what fuel rail you are running?

From the photo, it looks standard with standard fuel regulator?

Also, what suspension is it running?

Tried ringing you but message says you're unavailable.

Contact me.

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
Can I ask what fuel rail you are running?

From the photo, it looks standard with standard fuel regulator?

Also, what suspension is it running?

Tried ringing you but message says you're unavailable.

Contact me.

Like I said it got a modified fuel rail. I bought a billet but it was not that good so my mechanic just modified the original one so it has a much bigger inlet and it flows more than plenty so there was no need to chase down another rail. As to contact me I am currently unavailable in the mornings and can be contacted afer 1pm everyday...

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
f**k, that is such a nice looking gtr. Must cost you heaps to keep all those cars and bikes insured and running at their peak!

Yea but you only live once and I just cant get enough.... love rush :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      5th November if you want to come out for a spin wakfield
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
    • GTSBoy
      R34 GTT triple gauge pod plug pinout?

      By GTSBoy · Posted

      I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
×
×
  • Create New...