Jump to content
SAU Community

Fitting Sard Fuel Pressure Reg To A R34 Gtt

yellow34gtt
 Share

Recommended Posts

yellow34gtt Apprentice

yellow34gtt

Posted
Posted (edited)

hi all ,

just a small question on sone help with the install of a sard fpr on my r34 gtt

the fuel pressure reg it came with (2) blue screw in parts that fit the" fpr " and a adaptor part that fits my fuel rail, is that all the parts i need to fit it .

i think maybe some fuel line pipe & clamps will be needed but how it fits to the fuel rail i have no idea i understand that the top part is for the vac and the other two, one is for return and the other is for the rail.

i'm thinking i need a nother part to screw into the part that goes into the fue rail adaptor like the blue pice that screws in to the reg....

so to make things clear in this pack i have (1) fuel pressure reg (2) blue screw in pieces and (1) blue adaptor piece with a little black rubber ring is that all i need for the fitting of this sard fuel reg to my r34 gtt..

so any help with would be great i'm a novice at this as you can tell. an install guide for this or an explanation of how it fits together would be a lifesaver.

Edited by yellow34gtt
BezerkR32 Veteran

BezerkR32

Posted
Posted

shouldnt the supplier have supplied you with fitting instructions and a list of parts?

hi all ,

just a small question on sone help with the install of a sard fpr on my r34 gtt

the fuel pressure reg it came with (2) blue screw in parts that fit the" fpr " and a adaptor part that fits my fuel rail, is that all the parts i need to fit it .

i think maybe some fuel line pipe & clamps will be needed but how it fits to the fuel rail i have no idea i understand that the top part is for the vac and the other two, one is for return and the other is for the rail.

i'm thinking i need a nother part to screw into the part that goes into the fue rail adaptor like the blue pice that screws in to the reg....

so to make things clear in this pack i have (1) fuel pressure reg (2) blue screw in pieces and (1) blue adaptor piece with a little black rubber ring is that all i need for the fitting of this sard fuel reg to my r34 gtt..

so any help with would be great i'm a novice at this as you can tell. an install guide for this or an explanation of how it fits together would be a lifesaver.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...