Jump to content
SAU Community

Recommended Posts

There was one going for a carton of beer a few weeks back, worth a search.

You could try somo of the wreckers, but make sure they know that an auto insnt worth much cash

that was for a r32 i think.

there not the same box are they?

my current box has been holding 270kws for a while now but im thinking of upgrading to a new gt3582r-iw when there released. I dont think the standard box will appreciate that much power, so i may as well get Mike to build a box properly including high stall etc, and have it ready to go.

i want 150 for it if i cant get that i will keep it for a spare for my 33

re401A i cant see a id tag on it but give me a clue and i will have another look for ya

theres a tag on the drivers side near where the output shaft housing bolts on to the trans.

about six inches from where the tailshaft goes in.

what does this tag say.

ok had a look for a tag all over the box and cant seem to find one but i know the box come from a r32 as i helped pull it out i have a r33 and was going to keep it as a spare. they look the same as far as i can tell but maybe ring mike from mv auto to confirm if they are the same if so the one i have drove smooth and had around 70ks on it sorry i cant be more helpfull than this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...