Jump to content
SAU Community

Which Type Of Coolant To Use On Gtr?


R34 VSPEC
 Share

Recommended Posts

Hey boyz and girls,

Just wanna get an opinion on types of coolant to use in a GTR. Any particular brands that are good? what ratio mixture should be used?............just want to make sure that coolant types are not detrimental to coolant lines, seals, pumps etc...

Got a mate who recently had coolant changed and was using a 50/50 mixture but car had a syrong coolant smell after the drive................is that normal?

Cheers.

Link to comment
Share on other sites

Got a mate who recently had coolant changed and was using a 50/50 mixture but car had a syrong coolant smell after the drive................is that normal?

Cheers.

Smell because while ur mate was filling the radiator up he might spill some on the engine?

Anyway, i think the best is to use NISSAN genunie which available from most Nissan dealer.

Link to comment
Share on other sites

redline coolant with inhibitor (pink in colour) with distilled water. good flush out to get rid of the glycol base from previous coolants + rust dirt general crap etc. the stuff works good with glycol, but better without it. or any good quality 50/50 glycol (the green stuff)

i currently have power steering fluid in my raditaor and it hasnt overheaded! (still not reccomending it!)

Link to comment
Share on other sites

redline coolant with inhibitor (pink in colour) with distilled water. good flush out to get rid of the glycol base from previous coolants + rust dirt general crap etc. the stuff works good with glycol, but better without it. or any good quality 50/50 glycol (the green stuff)

i currently have power steering fluid in my raditaor and it hasnt overheaded! (still not reccomending it!)

Redline Water wetter is not recommended for winter used, only suitable for summer or track use. If you must use RL WW, pls mix at least 15% coolant and the rest distilled water.

Power steering fluid or ATF in radiator is a major no no. The viscosity of the fluid usually 7cSt or more will decrease the heat transfer rate of the medium (fluid) by hell of alot.

General guide

PSF or ATF ~ -50 to -70% decrease heat transfer

50/50 coolant/water ~ normal heat transfer

RL WW/100% water ~ 50% better heat transfer

Link to comment
Share on other sites

i used 2L of genuine coolant from nissan to replace all in my GTR block , radiator and hoses. Make sure u use green coolant. and just use the genuine. if ur too cheap to use a $12.50 per Litre bottle of coolant. then ur prob too cheap to own a Skyline. its gonna be an expensive piece of work.

Link to comment
Share on other sites

Redline Water wetter is not recommended for winter used, only suitable for summer or track use. If you must use RL WW, pls mix at least 15% coolant and the rest distilled water.

Power steering fluid or ATF in radiator is a major no no. The viscosity of the fluid usually 7cSt or more will decrease the heat transfer rate of the medium (fluid) by hell of alot.

General guide

PSF or ATF ~ -50 to -70% decrease heat transfer

50/50 coolant/water ~ normal heat transfer

RL WW/100% water ~ 50% better heat transfer

not a good idea to run power steerin fluid in ur coolant true. im not doing it by choice people. NEVER use power steering fluid in ur cooling system

i dont know hows its getting in there but it is. the mechanics trying to figure it out

Link to comment
Share on other sites

i used 2L of genuine coolant from nissan to replace all in my GTR block , radiator and hoses. Make sure u use green coolant. and just use the genuine. if ur too cheap to use a $12.50 per Litre bottle of coolant. then ur prob too cheap to own a Skyline. its gonna be an expensive piece of work.

Thanks for all the feedback guys. Just flushed the system and gone 50\50 Geniune Nissan green stuff and demineralised water..............only the best will do!

Link to comment
Share on other sites

Nulon's Green Long Life stuff is actually alright. 5 years protection and just add 33% (of your total capacity) into your coolant system after the flush and then fill with water. Too easy.

Link to comment
Share on other sites

I checked out the Nissan stuff, I was actually suprised how well priced it was. Very similiar to that of good aftermarket gear.

I'm currently running the Nulon green. I did a little research in to what is required in a good coolant and it had good levels of the good stuff. :P

The nulon green stuff is definitely a good bang for buck coolant.

Link to comment
Share on other sites

I prefer Nulon's Concentrate because you know you are getting the right ratio going in. Ie 2.5L for a 7L car.

The problem with premixed stuff is that you'd worry about water left in the block which causes dilution. You'd be suprised how much water stays in the block if you dont drain it out.. like a few litres!

I agree, Nulon's Green Concentrate at 20 bux for 2.5L is by far the best bang for your buck. 5 year protection too. Sweet.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • So last night pulling away from the lights, I lost power for about 1 second. Bit weird, but I kept driving... 5 minutes later the pump completely dies. When I tried to start the car, the pump won't even prime.  I left the car for about an hour, tried to start it and it all appeared fine. Pump primed, car started, got the fuel pressure I should have.... Start driving home, 5 minutes later it dies again. I'm stuck in a shit spot this time going up hill with a car right behind me, so I just let the car continue to turn over while praying to the fuel pump gods. After about 2 minutes of turning the engine over, the fuel pump came back to life and I got home (only about another 5 min away).  So I've been digging around online, it seems like the 525 fuel pumps really don't like to be run at 100% all the time. I've found quite a few examples online of people killing their Walbro 525 pumps within about a year of usage when they are run without PWM.  So, my pump is an Aeroflow 525 (AF49-1057) and I've been running it at 100% without PWM. I'm thinking the Aeroflow 525 didn't like being run at 100% and has burnt itself up.  I really am sick of dealing with fuel pump issues, my current thoughts are -  1. Use a Walbro 450 and run it without PWM. It seems like these pumps hold up pretty well to being run at 100% all the time. I only make about 350kw and can't see me making any more power any time soon so this is probably a fine option.  2. Get a Walbro 525, run it with PWM. I know doing this will annoy me as I feel like with only 350kw, its extra expense that I don't "need" and I'll be thinking the whole time while setting it up that I should have gone with option 1. I know I'll be happy with this option when its setup and running, its only the initial setup frustration and cost as an issue.  3. Get a Walbro BKS1001 brushless pump. This is the fu*k it I'm already going PWM, might as well go full retard. This option just seems better in every way, with the only downside being cost. But I don't know much about this pump so I could be wrong.  Happy to get everyone's thoughts before I go digging around in the fuel tank again. 
    • Doing it this weekend. For sure this time. Thank you forum gods.  And im running map sensor now with the haltech. Still have the AFMs attached to the mushroom dome shaped air filter things
    • Actually, it is probably pretty legit. I mean, it's still woke feminazi bullshit academia, but you would have to agree that it is very likely that there would be a correlation between wanting a loud exhaust and scoring at the unpleasant end of the scales for dark triad personality traits. The fact that they found it didn't correlate with narcissism and only with psychopathy and sadism definitely shows that the loud exhaust thing is more of a "f**k you" than a "look at me", and I reckon that rings pretty close to most of the dickheads who take it to the extreme. Remember, this is correlation with tendency to be closer to one end of a personality trait scale than the other end. Of course someone who is at the literal opposite end of the psychopathy scale is going to be so considerate of others that they wouldn't even think about wanting to upset anyone with a loud exhaust. So the finding isn't that "you are a psychopath". Just that you score more towards that end of the scale than someone who doesn't like loud exhausts (on average, not necessarily even for specific individuals).
    • Blitz ER34 at some point hopefully, should be allowed in Gr3 if they do.
    • Stock R33 boost control, with the exhaust, and FMIC done, will boost creep. There is no tuning around it if it is the factory boost solenoid.   If it has an aftermarket electronic boost controller, the settings/mapping can be altered in it.   Oil could be anything as mentioned, however did it ever do it before you did the turbo swap? How much and how often did you drive the car before the swap?   I'm hinging on too much oil supply, or it's not draining properly.   To check, pull the air outlet off the turbo. Is it full of oil? Drop the exhaust at the turbo, does it appears to be oiled/coked? Now pull turbo and check the exhaust manifold, does it appears oiled and coked the same way?   Secondly, the PCV could even be stuffed / not functioning properly and will cause blowing of blue smoke.
×
×
  • Create New...