Jump to content
SAU Community

Recommended Posts

i use menzerna, got a few polishes dependng on the application..106 for my darker coloured car..

have a bosch random orbital and full set of edge pads.

have some p21s as the sealant wax but gonna try menzerna.

been using megs quick detailer+clay but gonna switch over to clay magic blue when it runs out.

ofcourse regular wash with a rinse bucket as well and dry with waffle weave.

DSCN1235.jpg

  • 2 weeks later...

autoglym what exactly??? it's like saying... "HKS, makes my car go faster, they're awesome!"

they make some good products, their bumper care one is not bad...

but there's a whole other level above autoglym :happy:

I have just upgraded from Mothers to Poorboys and I must say its far superior. No more off the shop shelf products for me. And bang for buck you cant go wrong. Next step up to try will be P21 and also want to try Dodo Juice people are saying it on par to Zymol or Swissvax ,without the cost. Just need to find someone that sell it in Oz

dude, finalinspection.com.au has been mentioned a zillion times in this thread. He sells ALL the best stuff

Swissvax

Zymol (he has a tub of Royale, $18,000 if you're interested)

Dodo

Zaino

P21s

Menzerna,

etc, etc..

Which dodo are you referring to? They have a lot of products.

Mate, poorboys is decent but just go get some Menzerna polishes, not that expensive and you CANNOT get better. You know what you're doing, so just get the best :happy:

P21s is a great BFYB product, and the new P21s100 is better again (although more $$). Swissvax Onyx is a great wax as well and not that $$.

I've seen some great results from of Dodo's range of waxes as well. So Onyx, Dodo (choose the wax depending on the car colour), P21s100 would be some great waxes to try.

Dodo's Lime Prime is one of the best pre-wax prep products available as well. Obviously suited to Dodo products, but works equally with others.

Yeah want some Dodo juice purple haze, so will drop him an email. I have two, I use a 1200w Ryobi Orbital for the heavy stuff, it is a bit fast as it runs at 1500rpm to 6000 rpm but have mastered it at those speeds, just dont use heavy pads LOL and a Ryobi ERO750VK random orbital for light paint correction and swirl removal, orbital diameter is a bit small though at just 3.5mm.

Edited by R31Heaven
  • 2 weeks later...

im about to spend some time on my paint - its black & was repsrayed about 2mths ago...considering its new paint i shouldn't use clay or polish right as this cuts the paint which i dont want to do?

if im on the right track i should only use a wax to compliment the paint.

for example if i went with autoglym i would use deep shine & gloss protection.

Edited by Marko R1

Ask the sprayer about curing time, but yes, that is quite fresh paint. Perhaps give it 3 months before detailing.

In the mean time it's VERY important to give the new paint some protection, BUT also allow the paint to breathe so it can cure.

A Carnauba wax is perfect for this. I'd pick up some P21s paste wax, or even some OCW (optimum car wax) from Final Inspection, to help you with this. Both around $30, but brilliant for the money, best bang-for-buck waxes you can buy.

Build up some layers to protect the paint until it's time to detail.

Skip the AutoGlym stuff.

im about to spend some time on my paint - its black & was repsrayed about 2mths ago...considering its new paint i shouldn't use clay or polish right as this cuts the paint which i dont want to do?

if im on the right track i should only use a wax to compliment the paint.

for example if i went with autoglym i would use deep shine & gloss protection.

If its 2 pack it will be cured, if its acrylic and has had hardener put in it, it will be cured. If it is just Acrylic, give it another month before putting any sealers on it.

Edited by R31Heaven
where can i buy the 'P21s paste wax' or 'OCW' from?

carnuba wax sounds very good as well after reading this thread...

can anyone help me with this? ive looked @ autobarn & supercheapauto website & they dont stock these products - i wanna get this today :D

  • 3 months later...

COMPLIMENTS to D'ELEGANCE in Western Subs of Sydney.

They tried to deliver some Zymol products to an address at Earlwood and it never arrived!

Someone in our Postal Service has it still, I presume...

Anyway, D'ELEGANCE rather than lose goodwill, replaced the whole order in exchange for direct pick-up!!!

This is Service +++ from the old days!!! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...