Jump to content
SAU Community

Recommended Posts

Sounds like your mechanic or someone is throwing alot of ideas at you to get you to lots of little things... good marketing strategy.

So your car is running a little rich. You need to lean it back a little, using an SAFC or aftermarket ecu.

You don't need a:

- Power Run on the dyno so they can go, yep... its rich. and adjust base timing... thats so dodgy.

- A new fuel pump, so they can go, yep... its still rich.

- A chip... who remapped it?

Your BOV has a thin hose coming off it to make it work. Thats not the hose they were asking about. Does it have an opening which lets the air out, or a big fat hose or pipe which runs back to the inlet? Does it go, pshh? Or is it completely silent.

It probably started after a service because they probably cleaned your air filter, or did you put a pod on there? Either way, as soon as you get more air, your stock ECU is going to go rich.

Sounds like your mechanic or someone is throwing alot of ideas at you to get you to lots of little things... good marketing strategy.

So your car is running a little rich. You need to lean it back a little, using an SAFC or aftermarket ecu.

You don't need a:

- Power Run on the dyno so they can go, yep... its rich. and adjust base timing... thats so dodgy.

- A new fuel pump, so they can go, yep... its still rich.

- A chip... who remapped it?

Your BOV has a thin hose coming off it to make it work. Thats not the hose they were asking about. Does it have an opening which lets the air out, or a big fat hose or pipe which runs back to the inlet? Does it go, pshh? Or is it completely silent.

It probably started after a service because they probably cleaned your air filter, or did you put a pod on there? Either way, as soon as you get more air, your stock ECU is going to go rich.

ok

got a fuel pump coz it was leaning out. still had original 1990 fuel pump. was next on mod list anyways.

re-map was done by dr.drift. so he knows what hes doing.

its a turbosmart bov, so it goes psshh. stock bov going back on too.

i had a pod on it. i now have the stock box in, but havnt driven it due to battery dying.

i had the chip and fuel pump put in coz the AFR's were at 14-15. very high.

its back down to 12 now.

can a faulty o2 sensor cause this?

power run was done so i could see what power i was making.

I would close up the plug gaps to .8mm, then refit the standard bov. the car wasn't running lean because of the ecu, it was the fuel pump. Lean mixtures are easier to ignite, so by replacing the fuelpump you have made the miss worse. If the plugs dont fix it, check the coils. might not hurt to chech the cam and ignition timing.

I would close up the plug gaps to .8mm, then refit the standard bov. the car wasn't running lean because of the ecu, it was the fuel pump. Lean mixtures are easier to ignite, so by replacing the fuelpump you have made the miss worse. If the plugs dont fix it, check the coils. might not hurt to chech the cam and ignition timing.

ive had the plugs changed at the major service, and they were genuine nissan plugs which equal to the NGK equivalent.

timing was fixed by nissan, coz i took it back to them

went away, but has come back.

i didnt think it would be coils, becoz it seems to be an over-fueling issue...

but i dunno. not a mechanic....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...