Jump to content
SAU Community

Recommended Posts

hey guys,

I only brought this car about 2 months ago, but is for sale due to getting a new job and a company car...

Specs:

4 x new front tyres,

new splitfire coils

new rear muffler

FMIC

3' exhaust (turbo back), s/s dump and rear section

18's

Side skirts and rear pods

boost controller, pod filter in box

alway serviced at 5000kms or less with motul oil

alarm and immobiliser 3point

boost gauge, Jvc mp3 player deck

tints

dyno : 179kw at rear wheels on 10psi

always looked after and washed twice a week,

imported and complied last Aug by Justjap at kirrawee so Kms are genuine

Kms: 120 XXX

price: $18 000 neg

Pls pm me and ill call you if you send me your number.

Cheers

Joel

post-29379-1154863626.jpg

Edited by HackoBoy
Link to comment
https://www.sau.com.au/forums/topic/129081-1996-series-2-r33/
Share on other sites

bump this up...

guys open to offers and trades on 4wd

plus for skyline members ill offer a $300 spotters fee.

So if you recommend someone and they buy the car then you get an easy $300....

Cheers

Joel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...