Jump to content
SAU Community

Recommended Posts

Ummm... I think he said 5w50.

Which is what I use, over filled (to the bottom of the bump on the stick) ofcourse.

I think 10w30 would break down too early in an RB turbo engine (engine gets too hot for that oil).

Sorry yes 5W50. Same thing really. Still nice and thick.

The M1 10W30 won't break down in an RB. Its fully synthetic PAO based oil so it can handle the stress without breaking a sweat. Hell Nissan's OEM oil is 7.5W30 mineral stuff so if that can do the job...

Your average RB doesnt run any hotter than any other engine, why would you say that? The turbo is water cooled anyway so the turbo isn't as hard on the oil as the days of old.

Guest 40th-edition

i run 10w30 because i get it from work.. does the job and have no probs with it at all..

the numbers given to the weights of the oils r over rated ne ways... 50 is a large cold weight and 0 is just bull shit.. just oil componeys claming crap ( i know they go through sia testing)

i run 10w30 because i get it from work.. does the job and have no probs with it at all..

the numbers given to the weights of the oils r over rated ne ways... 50 is a large cold weight and 0 is just bull shit.. just oil componeys claming crap ( i know they go through sia testing)

50 is not the cold weight. It is the measure of the high temperature viscosity.

As for the numbers being crap, it is easy to compare the difference between two grades. Just tip some out of the bottle - it will suprise you how different they are.

Essentially, to compare the 5W50 to the 10W30 they are basically the same oil, just with different viscosity modfiers. The 5W50 will be "thinner' when cold & "thicker" when hot. This is a relative thing as obviously the oil's viscosity will decrease as it gets hotter.

At the end of the day you will be marginally better off with the 5W50 because it is more stable, most noticeably when hot.

is it 5W50, or 5W30? cause 5W50 sounds like a pretty thick oil to me.

its definitley 5w-50.... but u can buy 10w-30 aswell....

when is oil at its thickest? i never drive my car for longer than 50 mins at a time, i dont go on long trips.... so what would be better for me?

im only ever doing little trips to work and stuff... never big road trips..

Beef

whether you drive for 20 mins or 5 hours, once the car car has come up to operating temp the oil temp shouldn't rise (unless you are flogging it). normal oil gets thinner as it got hot, but multigrade oils are designed so they don't thin as much.

Edited by mad082

just doing a bit of research, normally oil thins at higher temp. multi-grade oils have polymers that stop it hinning too much (so its thin when cold, and not too thin when hot). the dissadvantage with high range oils (big gap between 1st and 2nd numbers) is that they are more prone to breaking down. it is the oil that lubricates, not the additives, so the less additives, the better.

Hi Guys,

There was mention above of filling oil past the MAX to the BUMP. I was told by one mechanic that this reduces the change of oil surge and is ok but by another mechnic that filling past MAX on the dipstick can cause potential damage. Can I get some sort of common consensus on whether this is ok?

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...