Jump to content
SAU Community

Recommended Posts

Hi

I have a Manual R33 GTS-T

I have changed all oils/filters etc in engine & now want to do the GB & Diff

Was thinking Motul Gear 300 for the GB & Gear FF for diff but due to being a bit short on cash I am now thinking...

Castrol VMX80 for GB & what Castrol product is suitable for my Diff??

Also just to confirm GB hold 3.8L & Diff 1.3L right??

Cheers

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/
Share on other sites

Hi

I have a Manual R33 GTS-T

I have changed all oils/filters etc in engine & now want to do the GB & Diff

Was thinking Motul Gear 300 for the GB & Gear FF for diff but due to being a bit short on cash I am now thinking...

Castrol VMX80 for GB & what Castrol product is suitable for my Diff??

Also just to confirm GB hold 3.8L & Diff 1.3L right??

Cheers

If the gearbox and diff are standard then those figures are correct. The best option for gearbox fluid would have to be Redline Shockproof Lightweight (Smurf's Blood). I think its around $100 for a 3.8Lt bottle. Thats what i will be running in my new box and sources tell me its the best out there for skyline boxes.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2394797
Share on other sites

If the gearbox and diff are standard then those figures are correct. The best option for gearbox fluid would have to be Redline Shockproof Lightweight (Smurf's Blood). I think its around $100 for a 3.8Lt bottle. Thats what i will be running in my new box and sources tell me its the best out there for skyline boxes.

Thanks

Yea i also heard Redline is the best but also most expensive therefore i would rather the "cheapest best" option hehe

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2394809
Share on other sites

Just remember that RB25DET gearboxes are becoming a very sought after item in australia and are also become very hard to find. Ive been searching for 3 weeks for a box and after finally finding one i can finish my build. Just remember you get what you pay for and if you take the cheap option, specially on lubricants for your motor and gearbox you can suffer an expensive lesson.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2394824
Share on other sites

Just remember that RB25DET gearboxes are becoming a very sought after item in australia and are also become very hard to find. Ive been searching for 3 weeks for a box and after finally finding one i can finish my build. Just remember you get what you pay for and if you take the cheap option, specially on lubricants for your motor and gearbox you can suffer an expensive lesson.

I agree but nissan recommend VMX80 so i cant see how it can do any harm? plus there are lots of people on here using it, so its not like i'll be throwing in any odd oil...I just want the cheapest option out of the oils which are recommended for my car (which is stock BTW)

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395064
Share on other sites

Then you will be fine. If you ever thinking of increasing the power of your vehical remeber to upgrade your oils to cope with the heat you will create in the box itself. remember its all moving parts down there and if it dont stay lubricated the metal on metal sound aint good to hear. You dont want your box fluid to boil and loose all viscosity and become water like.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395464
Share on other sites

Then you will be fine. If you ever thinking of increasing the power of your vehical remeber to upgrade your oils to cope with the heat you will create in the box itself. remember its all moving parts down there and if it dont stay lubricated the metal on metal sound aint good to hear. You dont want your box fluid to boil and loose all viscosity and become water like.

Thanks

So VMX80 is good for the GB but what should i use for the diff?

Also i just read that Gearbox oil is infact 2.8L not 3.8L...which is correct?

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395488
Share on other sites

Depends on what bleed you get from it. I get the 3.8l Smurf Blood and i used most of the bottle so i guess its a little under. I used a modified GB though so my capicity may be slightly higher. Ive just smashed box box to high heaven so ive lined myself up a standard RB25DET box and im dropping that in shortly. Im sure the standard is 1 gallon which im sure is 3.8Lt. I may be wrong but im sure a std . Diff i never touch as i blow them that often they dont get a chance to get to an oil change.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395661
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...