Jump to content
SAU Community

G/b & Diff Oils

Noel
 Share

Recommended Posts

Noel Community Regular

Noel

Posted
Posted

Hi

I have a Manual R33 GTS-T

I have changed all oils/filters etc in engine & now want to do the GB & Diff

Was thinking Motul Gear 300 for the GB & Gear FF for diff but due to being a bit short on cash I am now thinking...

Castrol VMX80 for GB & what Castrol product is suitable for my Diff??

Also just to confirm GB hold 3.8L & Diff 1.3L right??

Cheers

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/
Share on other sites
ShiftyR31 Apprentice

ShiftyR31

Posted
Posted
Hi

I have a Manual R33 GTS-T

I have changed all oils/filters etc in engine & now want to do the GB & Diff

Was thinking Motul Gear 300 for the GB & Gear FF for diff but due to being a bit short on cash I am now thinking...

Castrol VMX80 for GB & what Castrol product is suitable for my Diff??

Also just to confirm GB hold 3.8L & Diff 1.3L right??

Cheers

If the gearbox and diff are standard then those figures are correct. The best option for gearbox fluid would have to be Redline Shockproof Lightweight (Smurf's Blood). I think its around $100 for a 3.8Lt bottle. Thats what i will be running in my new box and sources tell me its the best out there for skyline boxes.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2394797
Share on other sites
Noel Community Regular

Noel

Posted
  • Author
Posted
If the gearbox and diff are standard then those figures are correct. The best option for gearbox fluid would have to be Redline Shockproof Lightweight (Smurf's Blood). I think its around $100 for a 3.8Lt bottle. Thats what i will be running in my new box and sources tell me its the best out there for skyline boxes.

Thanks

Yea i also heard Redline is the best but also most expensive therefore i would rather the "cheapest best" option hehe

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2394809
Share on other sites
ShiftyR31 Apprentice

ShiftyR31

Posted
Posted

Just remember that RB25DET gearboxes are becoming a very sought after item in australia and are also become very hard to find. Ive been searching for 3 weeks for a box and after finally finding one i can finish my build. Just remember you get what you pay for and if you take the cheap option, specially on lubricants for your motor and gearbox you can suffer an expensive lesson.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2394824
Share on other sites
Noel Community Regular

Noel

Posted
  • Author
Posted
Just remember that RB25DET gearboxes are becoming a very sought after item in australia and are also become very hard to find. Ive been searching for 3 weeks for a box and after finally finding one i can finish my build. Just remember you get what you pay for and if you take the cheap option, specially on lubricants for your motor and gearbox you can suffer an expensive lesson.

I agree but nissan recommend VMX80 so i cant see how it can do any harm? plus there are lots of people on here using it, so its not like i'll be throwing in any odd oil...I just want the cheapest option out of the oils which are recommended for my car (which is stock BTW)

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395064
Share on other sites
ShiftyR31 Apprentice

ShiftyR31

Posted
Posted

Then you will be fine. If you ever thinking of increasing the power of your vehical remeber to upgrade your oils to cope with the heat you will create in the box itself. remember its all moving parts down there and if it dont stay lubricated the metal on metal sound aint good to hear. You dont want your box fluid to boil and loose all viscosity and become water like.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395464
Share on other sites
Noel Community Regular

Noel

Posted
  • Author
Posted
Then you will be fine. If you ever thinking of increasing the power of your vehical remeber to upgrade your oils to cope with the heat you will create in the box itself. remember its all moving parts down there and if it dont stay lubricated the metal on metal sound aint good to hear. You dont want your box fluid to boil and loose all viscosity and become water like.

Thanks

So VMX80 is good for the GB but what should i use for the diff?

Also i just read that Gearbox oil is infact 2.8L not 3.8L...which is correct?

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395488
Share on other sites
ShiftyR31 Apprentice

ShiftyR31

Posted
Posted

Depends on what bleed you get from it. I get the 3.8l Smurf Blood and i used most of the bottle so i guess its a little under. I used a modified GB though so my capicity may be slightly higher. Ive just smashed box box to high heaven so ive lined myself up a standard RB25DET box and im dropping that in shortly. Im sure the standard is 1 gallon which im sure is 3.8Lt. I may be wrong but im sure a std . Diff i never touch as i blow them that often they dont get a chance to get to an oil change.

Link to comment
https://www.sau.com.au/forums/topic/129454-gb-diff-oils/#findComment-2395661
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Torana Lx Gtr Hatch, Lots Of Pictures

      By MBS206 · Posted

      I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • soviet_merlin
      Wheel refurb?

      By soviet_merlin · Posted

      Do you have any before and after photos? That's $200 just for the hydro blasting?
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Yea pedal box and no abs
    • zoomzoom
      WGNC34 Rear springs

      By zoomzoom · Posted

      It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...