Jump to content
SAU Community

Recommended Posts

Need to either clean or replace my air filter, atm i got a HKS mushroom one on that is really dirty, but i heard it isnt too good and i should jus scrap it and buy a new apexi style one.

Wat do u guys reckon, should i jus clean the mushroom one or buy a new apexi style one.

P.S. is there any difference b/w buying a real apexi or a fake $40 one that they sell at autobahn?

Link to comment
https://www.sau.com.au/forums/topic/129718-what-to-do-wit-air-filter/
Share on other sites

I have a hks musroom too, it was filthy. It went all crumbly when I took it out. Just replace it, costs $50 from justjap, genuine HKS too.

This is wat i am afraid of,

Should i get a real apexi one or just a $40 copy if i decide to replace it?

Just use an Apexi panel and get the stock airbox back on unless you need to run huge power. My GTR runs the same size panel as the GTSt's with 260rwkw so decent power is not a problem, it just has more air inlets to the box and that can be corrected with a with of imagination and cutting and ducting. Plus you can then run a decent front mount without defect.

Why would you clean an HKS filter element? They are a single use throw away item.

Purchase a new element for it as mentioned above, cost is around $50, and you then have a brand new filter.

Just Jap has them on their website

One thing you will notice though is that the hks pod makes a lot more noise than the apexi. Therefore, theoretically, it should flow more.

However, this would be at mega power levels. At stockish power levels, any extra flow won't give more power.

On a 1000kw car, it probably would.

One thing you will notice though is that the hks pod makes a lot more noise than the apexi. Therefore, theoretically, it should flow more.

However, this would be at mega power levels. At stockish power levels, any extra flow won't give more power.

On a 1000kw car, it probably would.

Completely wrong.

Just because it makes more noise doesn't mean it flows more. It could be increased turbulence causing the noise, or greater restriction, ie blow a certain mass(at the same temperature) of air through 2 vastly different sized orifices in the same amount of time....the smaller orifice makes much more noise due to increased turbulence and restriction so more effort or pressure is required to do the same job resulting in a less efficient delivery. Equate this to the smaller filtering surface area and the turbo dragging the air through. Also in terms of sound pressures, if noise is coming out that is causing a negative pressure wave in the intake. Bottom line, HKS filters are complete junk. There was a HKS panel in my GTR and the amount of sediment lying in the bottom of my airbox after the filter was worrying.

Correct that stock power levels would be around the same but better flow means better response. The important thing though is clean air and HKS clearly fails that criteria from both my personal experience and others' testing.

What the testing shows is the boost produced by the car with each filter, of which the Apexi and then Blitz were the best (highest) with SARD and HKS the worst, and the filtering ability for the medium used for which the Apexi performed best and the HKS about the worst. I have another similar study on my other computer that I'll post if I remember.

I don't like them because they are oiled, so can introduce oil onto the AFM element and they don't clean very well. They also state they are for race only therefore call doubts about legality for road use.

Read the above I have posted. Will your non turbo GTS-4 be pulling more power than my GTR? Stick with the stock (but modified for extra air inlets) airbox and use an Apexi filter panel and protect your engine. Would you use really crap oil in the engine? Why introduce dust that will increase wear more than some oils?

Sure it doesn't look as cool, but if you wanted to be cool you'd have a GTR or RZ Supra or late model RX-7 :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...