Jump to content
SAU Community

Recommended Posts

ouch jet-33

welcome to my world

i cracked my front bar in two places first day i got the car

haha

but man its a new 400R bar, thats a bitch

how bad is the cracks? are they like mine?

maybe you can buy some fibre fill and do it yerself

and jus put some touch up paint on it

since its silver and it isn't that noticable on silver

are you running stock height?

man you musta went over the driveway pretty hard to crack it

i went over a ramp at 40kmh and bang two cracks and other line cracks all over the ridges and cracks where the bolts and screws are

pretty fuct up

was barely movin at all, just a little lip on the side of the drive

i think it was actually the fkn support brace undeneath that the damn panel beaters decided to put in...theyve stooged me again

cos i think that rubbed on it, cos the bar didnt touch, and cos the brace didnt want to budge it draged the kit with it and cracked it

im lowered, real bad with this bar, haha, low as

ouch!

i feel for u jet.........i've been there

just one small mistake and *crack*!

damn fibreglass!! why can't they make it more flexible!!!

try Auswide in Ringwood, found their prices too be lower than other places i checked, and they did a decent job of patching a HOLE and repainting my front bar........

address:

4-5/7 Heatherdale Rd Ringwood

(03) 98702088

Time, labour, oven time, workshop time - plus the fact most are insurance jobs so they can jack the price up. I reckon just speak to a few places - whenever previously I've got stuff fixed on old cars, its generally "is this an insurance job?" say "yes" and its like almost double. Speak to 'em, if they jack you around just go elsewhere. My 2c.

Fibro kit is $30 plus a few extras you'll need. I might make a start on fixing mine this arvo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...