Jump to content
SAU Community

Recommended Posts

the bigger the wheel, the sh*tter the ride. i have 20" wheels on my R33, and while there is no rubbing etc and the wheels sit under the guards, ie slammmed hard, the ride is hardly comfortable...

i put my stock 16s back on and it rides so good now! 18s with dish are the ideal wheel for a R33 i reckon.

As for tyre size, the 235 tyre may be too wide with a 19" rim. I know that if i fit 235 tyres to my 20s, i need to shave a suspension arm slightly to make them fit. the 225s i have on there at the moment are fine though.

here is some pics of mine with big wheels, looks hot but comfort is certainly lost....

http://www.skylinesaustralia.com/forums/in...howtopic=129884

WTF? :)

I have 19's, previous tyres were 245(f) and 275®. Only ever had minor rubbing of plastic gaurd liner (not gaurd).

post-1811-1156416123.jpgpost-1811-1156416135.jpgpost-1811-1156416148.jpgpost-1811-1156416162.jpg

I personally really like the grey rims on your photoshop pics, just looks more racer. All depends is you are after bling or a race style look. As you can see i am VERY partial to dark rims ;)

What are the width of the rims? If you can get 8"(f) and 9"®, then tyres will be 235(f) and 255/265®, that will be ideal. If rims are 8" wide all round, stick with 235 all round. Hankook K104 or K107 are pretty good for a cheap tyre, i have been using them for the last 4yrs.

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

mate id go the gun metal, or even just silver.

gold rims look good on white and black cars but anything else and i think they look shit. maybe blue cars are ok

gun metal and gun metal i think would look a lil washed out, i hate chrome, but a nice set of silver wheels would be good on gun metal car, make it stand out a bit

Thanks :P

Colour is off the '96 Ford Mustang; It's a 3 layer perl, called: Lazer Red.

off topic -

Al, what colour is your car? doesnt look like the factory maroon..

those rims suit it very nicely too!

i still say gunmetal too sammie :P

honastly, they both dont suite the car at all, and i think most ppl feel the same i dont think they want to tell ya, they dont suite a SKYLINE i would put them on a hatchpack, a GTI a GTIR or a CRX, more of a rally type, but the best best wheels i've seen that suite that colour, deeb dish shadow chromes, they looked awsome, but if you've only got these 2 to chose from i would go with the grey, the gold is way 2 much. dont take it personal champ just saing what i think, half of the pplz that have seen my car dont like my wheels, but i liek em so dont matter/....

R33-Lovr---apologies

keep in mind its dark,

post-28942-1156539747.jpg

R33-Lovr - if everyone thought they didnt suit the car, im sure they would have told him, its not like its going to affect us if we tell him we dont like them?

personally i like his rim choice better than yours, but thats a personal thing.

and sammie - i mean a gold edge around the rim.. ill see what i can knock up in photoshop :)

edit: like this perhaps?

post-15551-1156547938.jpg

I reckon they both look great! Go the gold ones if you want, but be aware the will be covered in brake dust and always look dirty.

Or go the gunmetal ones and spray your calipers gold, that way the rims wont look dirty from brake dust, well much, and when you are driving along your calipers will stick out like dogs balls, being the only gold thing on the car :)

Just my opinions :) Either way, it's a bloody nice rim!

mitch u done a dodgy job but i can see what you mean lol ! and thats quite a good idea looks real good wander where i could get a place to do that and r33 lovr i understand what your sayiing if anyone doesnt like the rims i dont mind if they say all good =)

R33-Lovr please speak for yourself and not other people that you don't even know :) . I like his rim choice, and just prefer the grey colour. Your rim choice is also good, and is actually not far off Sammie's rim style. I even like the Advans in your avartar :).

My taste in rims vary greatly, but in general i really dislike big, bling bling, chromies on Skylines. It all depends on the car and colour the rims are being fitted to.

big bling, and 3 spoke rims are my pet hates :)

i used to dislike multispoke rims too.. until the car i bought had a set attached, now i love them :)

do they make those rims in any other colour sammie? or is it just gold and gun metal?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...