Jump to content
SAU Community

Recommended Posts

Just wondering if anyone has had experience with getting their engine 'carbon cleaned' - ie: take it to a mechanic and they run some sota cleaner through the motor whist its running. Its not the same as squirting a can of carby cleaner thru the motor.. or is it??

Can anyone confrim this is worth doing?? I've heard large carbon buildups on the pistons can cause engines to ping etc...

Link to comment
https://www.sau.com.au/forums/topic/131100-carbon-cleaning/
Share on other sites

I can't imagine it being required for a modern engine and didn't even know people still did it !

Way back in the old days we used to use brake fluid to de-carbon ;) Worked really well but I wouldn't suggest doing it nowdays :D

Link to comment
https://www.sau.com.au/forums/topic/131100-carbon-cleaning/#findComment-2424531
Share on other sites

We used to do that one too. I knew a guy who worked for a dealership many years ago that tried the water de-carbon trick on a customer's supra and got it wrong ( bent 2 rods, lol ).

The brake fluid trick was for severe cases and just to clarify, we didn't run brake fluid through the engine while it was running :D We used to soak the pistons / cylinders for about 2 full days which lifted the carbon build-up. Won't go into the whole procedure because it's illegal and has damage potential if done incorrectly.

Link to comment
https://www.sau.com.au/forums/topic/131100-carbon-cleaning/#findComment-2424609
Share on other sites

They use ATF fluid in rotors to de-carbon the apex seals if it has been sitting for a while. Not done whilst running though.

Mafia was starting a gb with water/methanol injection kits not long ago, reduces pinging and also cleans the internals of the engine. Could consider something like that... would also prevent the problem in the future.....

Link to comment
https://www.sau.com.au/forums/topic/131100-carbon-cleaning/#findComment-2426158
Share on other sites

I used to work for the Shell mechanical garages, and we had proper carbon cleaning machines that use high pressure and a special wynns product called "CARBON BLASTER". The results of b4 and after were massive, wish i had pictures of all the carbon buildup that actually comes out when the machine sucks all the old crap out.

Not entirely sure how the machine actually works, but the results from actually getting ur engine properly cleaned with a specialist machine vs just a can of carby cleaner, throttle body cleaner etc is 2 different leagues. Im not sure on whether u should get it done but we have done it from hsv's to bmw's but only if we thought the car would really benefit from it.

From memory it cost $120 - 150 depending on quantity of product used and takes 30mins - 1hr to do. Ask around and see if your mechanic actually has a proper carbon cleaning machine. not a can of carby cleaner!

Cheers Pete (BOOSTA)

Link to comment
https://www.sau.com.au/forums/topic/131100-carbon-cleaning/#findComment-2441078
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...