Jump to content
SAU Community

Recommended Posts

hi all.

i want to fit a short throw shifter to my S2, as i had one in my last manual car (chev powered lx torana hatchback) but would like to know what model will fit from the other model nissans, i can get a second hand one from a wreckers out of an r32 GTR but it will need a new rubber boot, and gasket set, but at $150 i thought he was a bit steep?

have had a look on a couple of the businesses in the classifieds on here but there wasn't much in there for us, hence why i would like to know what we cross-reference with, and where i would get one, and also how much i should expect to pay for it.

even some tips on how to fit would be good too,as in how much of the interior do i have to pullout to get to it? do i have to pull the box out to do it? all those sorts of things, if any one can give a guiding hand would be great

Link to comment
https://www.sau.com.au/forums/topic/131146-i-want-to-fit-a-short-throw-shifter/
Share on other sites

Nismo and C's make short shifter's for the Nissan boxes

Nismo ones are approx 10% shorter in throw and in stick height and have a good feel.

I had one in my R33 and loved it, and have just boought another one for my Stagea manual conversion

Got it from Nengun. Was under $200 delivered

The C's shifter are approx 30% less throw and have been known to be a bit harder to use which can cause you to miss gear's, plus they have been known to be a bit noisey sometimes. cost is over $300 new

Install is easy. Just remove your interior gear stick surround and rubber boot around the gear stick

Pop out the retaining C clip and swap over.

I am sure there would be something in the DIY section on install

darrinspencer, is the nismo short shifter resulted in any noticeable more road/gearbox noise transferred into the cabin?

I had C's on 2 yrs ago and find out it's very noisy on my gearbox, and it won't trigger the reverse light sensor when the gear selector is put into reverse. I had it taken out immediately and stay with stock shifter until today.

darrinspencer, is the nismo short shifter resulted in any noticeable more road/gearbox noise transferred into the cabin?

I had C's on 2 yrs ago and find out it's very noisy on my gearbox, and it won't trigger the reverse light sensor when the gear selector is put into reverse. I had it taken out immediately and stay with stock shifter until today.

Nismo shifter performed exactly like the factory shifter but with a quicker throw

That is why I have just bought another one

No noise or vibration thru the stick

hi again guys here is my vin number 6V900wgnc34127902

but i would still like to know where you guys have got your shifters from?

the c west one sounds ok but the C's one would be no good to me ifn it doesn't activate the reverse lights and is noisier etc.

or are they one and the same?

  • 10 months later...

all good have installed mine ages ago but lost this thread and couldn be stuffed finding it again hahaha.

got mine from andrew at kudos motorsport, great to deal with and it fitted a treat, works a treat and is a really positive shift now as before it was a bit like a spoon in a jar of jam.

cheers oxford

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...