Jump to content
SAU Community

Recommended Posts

I'm after a windscreen washer reservoir bottle, the mini water pumps (attached to the bottle normally), and all hoses that are required for the windscreen washing system to work (theres also a small one-way valve somewhere in the hoses that i need)

can be from any car - so anyone with a half-cut in brisbane

please let me know and i'll take them off your hands!

cheers,

Warren

Link to comment
https://www.sau.com.au/forums/topic/131494-wtb-washer-bottle-and-hoses/
Share on other sites

stephen22 - thanks mate. who is patrick? who does he work for? i'm not after one from a wreckers as they will want an arm and a leg for one and really its nore worth much

nv_n01 - its cool if its from a cefiro as long as it has all that i'm after! send me a PM when you know with a reasonable price...

where is he located?

who does he work for?

i'm keen for that price.. but i don't like just ringing a random person unless they are expecting me to call or unless they work for a company..

i've sent you a PM stephen..

sure you didn't see a coolant overflow bottle?

i thought i saw one too, but when i went to look all i could find was a coolant overflow bottle :rolleyes:

if i'm wrong. please tell me as i would be happy to get a supercheap version

Hmm could have been either actually - didn't look that hard but swear i remeber seeing the little plastic pump on the side of the bottle. I can neither conrim or deny then... maybe go in and ask them?

still waiting for people to get back to me with pics and descriptions etc.

am open to other ideas everyone!

realisticalyl no one is goign to buy one so if you have one this might be the only chance to get rid of it!



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...