Jump to content
SAU Community

Another R33 Drift Car

Noddy

By Noddy,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Noddy Proficient

Noddy

Posted
  • Author
Posted (edited)

Today I'm taking it to Queensland Raceway for a more serious shake down. I'm not looking to do a pb just want to see that it is all working and see how the stiffening has changed the feel and ballance of the car.

1.00.84 is the benchmark for this car on the sprint track so we will see how it goes on old tyres and a lower boost setting to try and avoid too much wheelspin and drifting. Somehow I think there may be plenty of the latter.

Edited by Noddy
Dale FZ1 Veteran

Dale FZ1

Posted
Posted
1.00.84 is the benchmark for this car on the sprint track so we will see how it goes on old tyres and a lower boost setting to try and avoid too much wheelspin and drifting. Somehow I think there may be plenty of the latter.

If that rain hangs about there won't be any shortage of the former! :)

Noddy Proficient

Noddy

Posted
  • Author
Posted

Early in the week Gentle and Dessie are watching Option vids in the shed and want to go hit the track. Looking at the calander they notice there is a sprint meeting on Sat arvo. They download, print, fillout and fax back thier entries. turns out this is vital because it was booked out by wed arvo, 110 enteries.

1morning-1.jpg

They got to the track early to get a pit but they were all taken up by morning practice. Eventualy they found 2 spots close to each other.

attrack.jpg

Luckily the clouds parted and the sun shon down for the two cars to have some fun. Gentle has done this before and was put in group 2 with Evo's, WRX's, some GT3's aven a 32GTR and a few other Skylines. Dessie was in group 5 with a bunch of race cars of all breads.

genontrack.jpg

dessieontrack.jpg

Fun was had by all as both cars were on normal street tyres. There was plenty of accidental sliding, well, sort of accidental. Gentle got down to 1 tenth of a second from her previous best time which was set on semi-slick track tyres.

Dessie jumped back on the trailer and Gen her followed home.

goinghome.jpg

grandmasterb Grand Master

grandmasterb

Posted
Posted
changes to shck setting seam to be more precise and it all just seams to work now. feels nice to drive.

Good stuff.

How's the tune now, you were having problems at first were you not???

Noddy Proficient

Noddy

Posted
  • Author
Posted
Good stuff.

How's the tune now, you were having problems at first were you not???

it is ok, I think the turbo didn't like the 2 year sit in the shed. It is an old plain bearing oil cooled t300 garrett with an external gate. Ill up grade it after easter and get some bigger injectors. Obviously some re tuning is on the cards too.

  • 3 weeks later...
Noddy Proficient

Noddy

Posted
  • Author
Posted

I have taken it to a drift test day at QR thursday week ago. I did'nt it to stand out toomuck so i went less wing and side steps. The seting up and fine tuning worked extreemly well, esp when you concide I havn't done any drifting for 2 years. The Sundar comp on the otherhand was a disaster.

1st run there was a masive oil leek while accelerating or cornering hard. this was linked to me not being careful enough with the gasket when putting the cam cover back on.

2nd run the conecter hose from the turgo to the intercooler piping poped off. that was a hot one to fix. All in all I lost about 2 hours of practice and qualifing time. then came the ballance of the thing.

The return of the wing upset the front and rear grip ballance. Same tyres and shock settings front and rear but totaly different when trying to slid. This coupled to the ppl who spun and spoiled the few good runs I had ment I didn't even qualify. I was disapointed in myself to say the least.

I took the wing off for the afternoon session and I had my car back. There was an astonishing diferance in the feel of the car.

This weekend we ar racing the Celica at the Gatton Street Sprints and most likely taking the Skyline to the Sat night drifting at QR. The Celica Sports an R32 GTR rear cradle with R33gtst diff axels and hubs, S13 shocks front and rear, R32 GTR brakes front and rear, modified R32 GTR turbos, laurel front lower control arms Not much toyota left. just the body.

  • 1 month later...
Noddy Proficient

Noddy

Posted
  • Author
Posted

Just thought I'd put an up date in, it's been a while.

I did get to run the car at the Gatton Street Sprints and managed ti win my class. It has been out to some more drift events and setup is getting better. The turbo that I thought might have been on the way out is fine, just needed a good flogging. Took it to a dyno to tidy up some maps and came away with 342rwhp on 14 psi.

This weekend will be my first propper race meeting against other cars and everything. (I know it souns lame but I couldn't think how else to say it) Iv'e entered the JDM series in the Queensland Raceway Championships. So new semislicks, brake pads & fluid etc. should be fun. I've also entered for the QLD V NSW super sprints at Carnell raceway in Stanthorpe and the Wheels on wide bay sprints up at marybourough.

All in all its a lot of fun atm. Injectors and a better braking system are next for upgrades.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...