Jump to content
SAU Community

Recommended Posts

hey guys, i got my motor replaced, and then it been running fine for a few days, until then, when it hits full boost, car would jerk and then stall, after it stalls, it wont crank over again, car just wouldnt start, its a 50/50 chance it would start up again, i have tested and swaped coils, change spark plugs, tested injectors to be ticking, checked afm, and pulled out the fuel hose, and seeing if any fuel was coming out, and it did, so fuel pump is all good, compression tested motor, it was good, car is a 93 r33 gtst and i replaced it with a 95 motor, I also changed the ecu to a 95 model ecu, but still no luck.......... i have checked all piping to see anything loose, but everything seems fine? what could be the problem? am i missing out on something?

Link to comment
https://www.sau.com.au/forums/topic/131907-car-starting-problem/
Share on other sites

hey guys, i got my motor replaced, and then it been running fine for a few days, until then, when it hits full boost, car would jerk and then stall, after it stalls, it wont crank over again, car just wouldnt start, its a 50/50 chance it would start up again, i have tested and swaped coils, change spark plugs, tested injectors to be ticking, checked afm, and pulled out the fuel hose, and seeing if any fuel was coming out, and it did, so fuel pump is all good, compression tested motor, it was good, car is a 93 r33 gtst and i replaced it with a 95 motor, I also changed the ecu to a 95 model ecu, but still no luck.......... i have checked all piping to see anything loose, but everything seems fine? what could be the problem? am i missing out on something?

Tune....?If not re-set computer then get it tuned later.

There is a section on this Forum to do this.

Cheers

hey guys, i got my motor replaced, and then it been running fine for a few days, until then, when it hits full boost, car would jerk and then stall, after it stalls, it wont crank over again, car just wouldnt start, its a 50/50 chance it would start up again, i have tested and swaped coils, change spark plugs, tested injectors to be ticking, checked afm, and pulled out the fuel hose, and seeing if any fuel was coming out, and it did, so fuel pump is all good, compression tested motor, it was good, car is a 93 r33 gtst and i replaced it with a 95 motor, I also changed the ecu to a 95 model ecu, but still no luck.......... i have checked all piping to see anything loose, but everything seems fine? what could be the problem? am i missing out on something?

Just because fuel comes out, doesn't mean it is ok. Check to make sure you have the correct pressure and flow. Until you test these, you cannot assume your fuel pump is still ok. Your problem sounds fuel related.

Whats full boost mate?

std ecu R&R maybe? But that wouldnt explain the not starting again. As elite 32 said it does sound like a fuel problem, more so lack of up high.

So you changed motor, loom and ecu or are all r33 looms the same from a series 1 and series 1.5?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...