Jump to content
SAU Community

Recommended Posts

Kinks they are not meant to illuminate forward. They illuminate the ground immediately infront of the car and to the side a bit. To be honest i feel safer driving with them on because low beams in my car are not that great and it helps me see the immediate area around my car better than otherwise. If i was in heavy traffic i would generally not use them.

Ive hit animals before so every bit helps. And they do light up underneith the fog aswell when driving normal, where i live thats quite common and they help alot in that situation. Mind you most people dont live in areas anything like mine. But picking on most fog lights is simply bs there alot more cars out there with blinding low beams and dodgy HID conversions than "fog lights".

Kinks they are not meant to illuminate forward. They illuminate the ground immediately infront of the car and to the side a bit.

Exactly - which is why I don't understand hatred such as this:

Yes they can fine you, keep them off. They're fcuking annoying and glarey and piss everyone else off when it hammers them in the eyes. Use them only in adverse weather as the rules state.

The original post is talking about R33 Series 2 foglights. These don't distract or cause blindness. Yes it is illegal to have them on (as other car models foglights do distract other roadusers) during clear conditions but to say R33 Series 2 foglights are detrimental to other roadusers could not be further from the truth.

Man dare i say it most fog lights arent distracting. Commodore ones are ok, falcon ones are a bit brighter but still ok to me. Big arse WRX ones are blindingly obviously bigger and brighter and some european cars have annoying ones but on the whole its such a blown out of proportion issue its just fund raising and easy at that. Its easier to get a decent guy for fog lights or a pod filter compared to some troublesome dickhead causing havoc in the neighbourhoods.

Xizor' wrote this day 2 Sep 2006 at 01:13 PM'

Kinks; they are not meant to illuminate forward. They illuminate the ground immediately infront of the car and to the side a bit. To be honest i feel safer driving with them on because low beams in my car are not that great and it helps me see the immediate area around my car better than otherwise. If i was in heavy traffic i would generally not use them.

FRONT FOG LIGHTS have an effective range up to 50 metres, but typically perform 10 - 35 metres. Why? Because under the weather conditions for which they are specifically designed, heavy fog, heavy rain, in bushfire smoke, heavy snowfall - it is not technically feasible to send a beam of light out much past this - without causing hideous amounts of glare. Such a light would then be more technically akin to low-beam or high-beam!

They offer reduced, reflected glare, you can note the difference between low-beam and front fogs on the headlining when you switch between them. Front fogs are also designed to show up the EDGES of the roadway whilst your at low-speed, so that you don't drive off the road, rem - this is when your at slow speed!

The front fog lights MUST be compliant, more on 'compliance' shortly. Compliant front fog lights are either 'white optic' or 'selective yellow' in colour, indeed, the majority factory-fitted these days are yellow, around the 97% mark on new market vehicles.

Xisor states he uses his to 'supplement' his low beam, highlighting his observation that the extra light 'close-in' helps him see better and avoid hazards.

BUT, the argument fails in one primary respect, 'speed', the faster you go the less effective the front fog lights become, at 100km/h you are at 28 metres per second, IF you rely on front fog lights to see 'at speed' - you will have effectively seen and hit the hazard, and perhaps be past it before you react!

Front fog lights are EXCELLENT for their designed intention, BUT it is crucial to have reduced your speed by a large amount, in Germany in heavy fog we have a law restricting speed on the autobahn to 50km/h - that gives you an idea, since you need this reduction, as a minimum to avoid any nasty happenings up ahead.

Front fog lamps are NOT compliant daytime running lamps.

In SEVERE low visibility conditions, or in general rainfall on the freeway in daytime, it is best to use only your park lights and front fog lights, this further reduces reflected glare, AND allows your front blinkers to be seen 'better' by other traffic, as low-beam can often mask front indicators.

In Europe, the EU Transport Commission experts will tell you that 'the primary defence against fog and fog like crashes - IS the "rear fog light", IT IS ONE OF THE REASONS WHY REAR FOG LIGHTS, and not FRONT FOG LIGHTS ARE MANDATORY IN THAT MARKET in their design rules.

WA and NSW have seperate rules to the ARR's prohibiting the use of front fog lights in clear conditions, as they are NOT daytime running lamps, and can be a distraction and that can lead to annoyance by some. That said, we are very close now to a re-worked Australian Road Rule 217 that will prohibit the use of front fog lights in clear weather conditions, this measn it will become an offence to have them on in clear weather throughout Australia, effectively bringing us up to date with most of the world.

HOW TO TELL IF THAT LIGHT IS ACTUALLY A FRONT FOG LIGHT:

look CLOSELY at the lens, you are looking for an "E Mark"; example "E13".

THE "E" or "e" means the lamp unit was submitted for world homologation testing and approval, this checks that the lamps design falls within the parameters set by the relevant UN/ECE design rule, which Australia then adopts as both ADR and then in the National Vehicle Standards.

NEXT to this E wil be a two digit number that represents the country code, example "E1" means the lamp was tested in Germany for world compliance. E11 is GB and so on.

NOW - NEAR this E mark will be the designation "02B"; here the letter 'B' or 'b' is UN/ECE codespeak for "front fog light".

OR A DRIVING LAMP:

A 'driving lamp' - used to aid in high-beam performance, will bear the same E Mark and the designation "HR" on its lens; here the letter "R" is UN codespeak for driving lamp!

Example; "HR-P" = halogen driving lamp bearing a plastic lens!

PACKAGING: Some shops sell what are actually marked fog lights as driving lights, just be aware of the compliance function, often the suppliers get it wrong, and thats a fact.

NOW - SOME lamps bear BOTH markings! Here the packaging is usally correct, in that the lamp is a driving lamp typically, BUT be aware that it will NOT perform as well as a dedicated single marked HR lamp. Such dual types are a 'compromise', more supplementing stanard high-beam than furthering it.

Ive hit animals before so every bit helps. And they do light up underneith the fog aswell when driving normal, where i live thats quite common and they help alot in that situation. Mind you most people dont live in areas anything like mine. But picking on most fog lights is simply bs there alot more cars out there with blinding low beams and dodgy HID conversions than "fog lights".

THE issue of aftermarket HID modifications is a serious one, doing an illegal modification can land you a defect notice and an infringement under typically ARR for 'causing undue glare'. Don't do it UNLESS you get a guarantee they are ADR compliant.

YOU CAN - Upgrade your light bulbs to marketed PLUS 30, 50 or even PLUS 60 Phillips type IF the products have the E MARK branded on the steel portions.

You can also add a dedicated set of driving lights, say to a light support bar.

IF you replace a set of front fog light bulbs, I suggest trying the "ALL WEATHER" variety, AS IT IS BETTER TO reduce glare in heavy fog, not increase it.

Edited by Keepleft

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...