Jump to content
SAU Community

Recommended Posts

post-3573-1156838225.jpgpost-3573-1156838235.jpg

post-3573-1158208103.jpg

I've flipped the outline image to match it with the dash pic.

Seems the Airbag light is LED, and the others are a combination of high and low wattage bulbs. I'm not sure how some of the incandescent globes change to red, but the "A" globes have the blue silicon caps on them.

A - High wattage incandescent globe with silicone cap.

B - High wattage incandescent globe. "WL" could be LED also?

C - Low wattage incandescent globe.

D - LED. Seems to be only for the airbag light? I guess you never want that one to fail?

E - Same as C?

R33 GTST

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - Blanked | 2 - HICAS

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33GTST w/Active Limited Slip Differential

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - SLIP | 2 - ALSD

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33GTS4

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD | 2 - SLIP (need to confirm 1/2)

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33 GTR

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

R33 GTR V-Spec

Left:

1 - Door Open | 2 - Air Bag

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

Top Center:

1 - Left Blinker | 2 - High Beams | 3 - Right Blinker

Bottom Center:

1 - 4WD | 2 - SLIP (need to confirm 1/2)

Right:

1 - Seat Belt | 2 - Check Engine

1 - Oil Low | 2 - Cat Temp High | 3 - Battery Low

=================================

Glossary:

Door Open

Air Bag - Failure or testing.

Fuel Low - Sender reports low fuel level.

ABS - Anti-skid Braking System failure or testing.

Hand Brake - (on R32 models, this can also mean that your brake fluid reservoir is low)

Left Blinker

High Beams - Not related to fog/spotlights.

Right Blinker

4WD - GTR/GTS4 4WD Attessa system failure or testing.

HICAS - Four wheel steering failure or testing

SLIP - Active LSD Traction Control on at testing and on when traction loss

ALSD - Active Limited Slip Differential failure or testing

Seat Belt - Drivers seatbelt only

Check Engine - Usually means an engine sensor is faulty.

Oil Low - Oil level low. Oil pressure is read from the oil pressure guage

Cat Temp High - Catalytic converter probe reading above normal temperatures.

Battery Low - Output voltage from alternator is lower than normal

I will update the others as I find out. If you know the missing ones, please advise!

Edited by RANDY

There is no "traction" light on the R33 gtst.

Also the GTSTML spec has SLIP and ALSD in the centre of the tacho

See here http://members.dodo.com.au/paul/pics/mycar...SCF0009_JPG.jpg

Ah yeah... That might be for another model.

I saw the SLIP (traction) on my mates R33 GTS4... which is not a GTST, as you pointed out.

Where in the centre for the "L" version? Instead of HICAS and whatever my other blanked one is?

in between fuel low and handbrake is the ABS light.

the 1 to the left of the fuel low light is blank

so its actually

1 - blank | 2 - Fuel low | 3 - ABS | 4 - Hand Brake

and the blanked off 1 next to the HICAS light is the 4WD light in the GTR

  • 2 months later...

4WD - GTR/GTS4 4WD Attessa system failure or testing.

HICAS - Rear wheel steering failure or testing

SLIP - Active LSD Traction Control on at testing and on when traction loss

ALSD - Active Limited Slip Differential failure or testing

GTST Active LSD model has SLIP and A-LSD lights in the centre

GTS4 version has SLIP and 4WD lights

GTR only has 4WD light

GTR Vspec has SLIP and 4WD lights

the normal r33 has viscous LSD

there was a limited build of the Active LSD model

which has the lights on the dash and the gtr differential

its the same as the vspec system

I can grab the same kind of image from FAST. It's just a matter of finding out the wattages and locations of all the bulbs and LED's. I'm sure the '32 owners would find it useful!

The number of threads i've seen where people ask "what does this light mean", "what would light up in this location", or "what kind of bulb goes here"... ;o)

Edited by RANDY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
    • Yeah I spent close to a year finding one. I was even tempted to buy a RB25DE N/A head and port it out. That latter option, could still be an option.
×
×
  • Create New...