Jump to content
SAU Community

Recommended Posts

Hey guys

Just wondering about economy for your Cefs, ive got a commodore im thinking of swapping for a ceff

Yes, ive done a search and didnt find anything (maybe i looked in the wrong place? if i did please let me know :( )

I currently get around 500k's to a full tank in city driving, heaps more on the interstate highways, but the car doesnt handle at all and is really too big for me day by day

So, post up how many k's you get, what motor (auto or man) and how hard you drive it - cheers :huh:

Something like this would be great

Year model:

Motor:

Man/Auto:

Average k's p/tank:

Hows it driven:

Mods:

What would you change about it if you could:

Thanks HEAPS guys :P

Link to comment
https://www.sau.com.au/forums/topic/133012-petrol-usage-for-ceffys/
Share on other sites

Year model: 1990

Motor: RB20DET

Man/Auto: Auto

Average k's p/tank: 520km average (65L tank tho)

Hows it driven: By my 57 year old dad, to and from work and shops

Mods: pod, exhaust

What would you change about it if you could: sell it and buy a prius coz dad bitches to no end about wanting a more fuel economical car (dosen't really wanna go fast anymore).

Year model: 1989

Motor: RB20DET

Man/Auto: Manual

Average k's p/tank: 450ish from memory, although havent filled up a full tank for awhile now with these fuel prices...

Hows it driven: Moderate (bit of everything, like a granny to work which is short distance so probably on rich tune there and back - also with a bit of a blast on some weekends etc)

Mods: Pod, some crappy restrictive exhaust, mainly stock to say the least.

What would you change about it if you could: Throw the rb20 out and use it as a boat anchor and put a 1jz or 1uz in...hmm :mad:

Edited by skypy12

Year model: 1990

Motor: RB20DET

Man/Auto: Manual

Average k's p/tank: ~420ish (~500 for freeway)

Hows it driven: Race driver? lol i rarely change gears below 4k, usually around 6, unless it still warming up.

Mods: Pod, Exhaust, HD clutch, Alloy Rad, oil cooler, boost @ 0.8 bar with GFB bleed valve.

What would you change about it if you could: If i could, i would add an aftermarket turbo. :mad: I know it runs rich as a mofo, for example it went to 9:1 afr on the dyno and sat there from about 4k onwards. A powerfc or remap would increase fuel economy.

Well for starters, a cef aint any smaller than a commodore.

I'm getting about 570kms per tank, combo driving, highway and gateway traffic every morning and afternoon, and thats not my best thats the average, about 55-57L will go in the tank when I fill up. If it was to be all highway Id crack the 700kms with easy I feel.

Mods being pod, exaust, 12psi, dr drift chip, and adj fuel pressure reg.

Its a 1988 manual rb20, but with a RB25 box behind it, and a 2 way diff (no idea what difference that makes in terms of fuel economy).

But thats on 98ron fuel, which is 10-12c more per L up here in QLD.

Changes I would make, Id turn it in to a Subaru Liberty Blitzen :)

1990

Rb20de

Auto

2 1/2 inch cat back

drivin - depends what mood i'm in. usually fairly easy going

not much country driving.

i get about 10-10.5 km/L

i'd get a manual gearbox, go the rb25 box

Guest a31rb25

Year model: 1990

Motor: RB25DET

Man/Auto: Manual

Average k's p/tank: approx 300

Hows it driven: pretty sedately due to the shit mileage

Mods: usual mods- pod, FMIC, etc

What would you change about it if you could: RB20 computer, remapped by Dr Drift for + KKR 480 turbo

NOTE: ATM i get no mileage at all, car isn't being driven, don't lose your license, it sucks.

Edited by a31rb25

OMFG did i just read this right...... Steve has finally seen the light... :sorcerer:

Mate i would love to add my milage input but i only know it goes thru about 2 tanks in a track day :)

BUY A CEFFIE YOU KNOW U WANNA!!!! :rofl:

Year model: 88

Motor: rb20det

Man/Auto: manual

Average k's p/tank: less then 100kms... prob around 50 kms max

Hows it driven: hard and sideways

Mods: lots, 200 rwkw and its a drift car and for track use only :)

What would you change about it if you could: 1jz :rofl:

Wow, thanks for the responses guys :rofl:

Lots of mixed k's in there (as i was expecting)

Ive just done a 511k tank with the holden, and so far this week i will beat that, so i think for now, the holden stays :unsure:

Not only the petrol is the deciding factor though, but the stereo, sunroof, climate control, cruise control are all nice things ive grown to live with, and i really dont think i can go without now in a daily driver

Thanks again guys - REALLY appreciated :(

Year model:1991

Motor: 1JZ GTE

Man/Auto: Manual

Average k's p/tank: 300-350 on short local runs, and 350-400 on a long run using highways [and not on boost all the time]

Hows it driven: hard....

Mods: standard engine, with KnN air-filter, standard blow-off, 3 inch exhaust with front silencers removed

What would you change about it if you could: bigger turbo and bigger fuel injectors.... blitz blow-off and blitz wastegate and a huge exhaust back-box.

Year model: 89

Motor:RB20DET

Man/Auto: Man

Average k's p/tank: 400 only, get 450 if i push it.

Hows it driven: To work and back in pretty heavy traffic. Lots of start and stop, then i give it a bit on the weekends. Still pretty crappy though, think the O2 sensor needs replacing

Mods: FMIC, RB25 turbo, pump, remap, stock air box.

What would you change about it if you could: 1JZ conversion, softer spring rates for the street. respray.

Hey steve... pulled one of the shocks out today at Bel Garage... the shocks need to be regassed or changed... hence the floatyness.

I also bought some shims off nissan to lock teh factory viscous diff.

stay tuned for dad's undercover dorifto machine.

Hey steve... pulled one of the shocks out today at Bel Garage... the shocks need to be regassed or changed... hence the floatyness.

I also bought some shims off nissan to lock teh factory viscous diff.

stay tuned for dad's undercover dorifto machine.

"Hey son, the car seems to oversteer a LOT these days since the last service - is everything ok?"

"Yeah dad ive noticed that aswel.........beats me :D "

lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...