Jump to content
SAU Community

Recommended Posts

Hey guys. When I purchased my GTR33 it came with a Kakimoto 3" Cat back exhaust. I am shooting for about 700-750WHP when I am done with my R33. Now I of course realize that I also now need to upgrade my downpipe which appears to be stock size or very close to it. However my real question it this.

I have been told that Kakimoto makes 2 different kinds of 3" exhaust, a racing one and an every day one. I am told I have the every day one. Is this true? Are there 2 different types? My exhuast appears to be 3 inches from the cat back, has manderal bends, a resonator, cat and muffler. Now I am used to running straight 3" pipe with only a muffler so I would of course remove the cat, but I was unsure about the other stuff. Is mine a decent 3" or would a different 3" be necessary?

I have also heard that a 3.5in exhaust is ideal for a GTR33 especially with my power goals, so would a 3.5in make a signifigant difference?

I guess I am just trying to find out if my 3in Kakimoto catback exhaust (as I said I would also upgrade Down Pipe) is sufficent for my 700-750WHP street car, or If I need to upgrade to a different 3" exhaust or even a 3.5". Thanks guys.

-Sayajin

  • 1 month later...

if it has a cat, ressy and a muffler then i wouldn't think it be a racing exhaust.

700awhp is a big figure.... i would have though 4" straight through would be more what you needed.

remember: (theoretically) turbocharged cars shouldn't run exhaust because turbos hate back pressure. whereas atmo engine need some back pressure to make low/mid range torque.

if i was aiming for 700hp at all wheels (which is about 525kW) then i would rather a bigger than neccesary exhaust than having the engine choking because it cant get rid of its exhaust gasses quick enough.

is the car going to be driven (or attempted to be driven) on the road? if so then you will be restricted as to how open you can have your exhaust. if its gonna be a track car then just go big! you dont need to worry about mufflers for the track.

so in conclusion, i would upgrade your exhaust.

if its going to be a track car then get 4" or close to pipe with no muffler or maybe just a ressy.

but if its going to stay on the road then keep the 3" and just get rid of the ressy and cat (but you run the risk of gettin a little yellow sticker if you do that)

hope this helps

I have a kakimoto and theyre just excellent wouldnt know why youd wanna get rid of it....and thats a large figure to be chasing! my advice would be keep it for now and see how you go if you need to upgrade well then do so but up until then id keep it theyre a rare thing over here

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...