Jump to content
SAU Community

Gb: R32, R33, R34 Skyline Carbon Fibre And Fibreglass Bits


Recommended Posts

  • Replies 272
  • Created
  • Last Reply

Top Posters In This Topic

Rflirty4 added to the list... just awaiting confirmation of stock first.

All the others in Order #2; your stuff is en-route now, sorry for the delay.

Well he said he's just waiting for a moment to get to the post office over there - it only takes a few days after that and I'll be sending everyone's stuff express once it's here!

OK I got an answer for the CF boot lid... you can get these in the following "colours":

Black CF (what we usually see in AUS)

Silver CF

Blue CF

Price I've been told is approximately $1k + freight... they are as per the photos posted on page 1. Obviously a few things will need to be transferred over (stop light, locks, latches etc)

Personally, I wouldn't bother unless you're made of gold.

OK I got an answer for the CF boot lid... you can get these in the following "colours":

Black CF (what we usually see in AUS)

Silver CF

Blue CF

Price I've been told is approximately $1k + freight... they are as per the photos posted on page 1. Obviously a few things will need to be transferred over (stop light, locks, latches etc)

Personally, I wouldn't bother unless you're made of gold.

any idea on freight cost?????? cause i really dont mind paying $1000 for the boot lid itself (as there is only one guy in australia that i have had an answer back on and said he can do it but he wants up front payment before making it and sound a bit dodgy eg. no pick up and bank deposit only even though he is in sydney and close to me!!!!)

maybe if more ppl want them we can split the freight costs?

and by the way im after black cf

thanks

Justin

Cost of freight will depend on the way we send it... obviously it will need to be packed very well; insured and tracked - these three items don't come cheap; add on more if you want it in a hurry too.

I will dummy up some numbers :P

Cost of freight will depend on the way we send it... obviously it will need to be packed very well; insured and tracked - these three items don't come cheap; add on more if you want it in a hurry too.

I will dummy up some numbers :P

thanks

i would appreciate that heaps, if other ppl are interested in these boot lids for r34 please voice your interests now and we maybe able to save on the shipping cost...

by the way im not in a huge rush so if i can save on the cost of freight by sending it economy, by boat i dont mind

I'd estimate that by sea; you'd be looking at an extra $100-$150 in freight... those in Sydney can then make the effort to come collect it from me as I really cannot be bothered to lug around a boot lid :) (I'm small, so lay off)

I'd estimate that by sea; you'd be looking at an extra $100-$150 in freight... those in Sydney can then make the effort to come collect it from me as I really cannot be bothered to lug around a boot lid :dry: (I'm small, so lay off)

mate that price of $1000+$100-$150 freight is fine. can you go ahead and order a black cf one for me please. just let me know when you need payment we can meet up and i can pay you in person. and pick up is not a problem.

also is there any chance of getting the boot lid made without the key barrell hole and the middle brake light hole? if so i would appreciate that but if not it doesnt really worry me.

thanks

Justin

0425291404

Justin; I'm not going to promise you anything yet - I will have to get in contact with this guy and ask for confirmation. I don't want to promise something I can't deliver that's all.

If he's all good with it then yeah, we'll go ahead with it ;)

Justin; I'm not going to promise you anything yet - I will have to get in contact with this guy and ask for confirmation. I don't want to promise something I can't deliver that's all.

If he's all good with it then yeah, we'll go ahead with it :laugh:

satanic

no problem mate just let me know when confirm. i appreciate your help.

thanks

Justin

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...